Reply to thread

Message

[QUOTE="Bruno, post: 31107, member: 89"]
Well Stargazer i dont know how many Super Dishes you have installed but it looks like to me you have read the book on them..I would have to agree on most everything you said but i would use Transponder 11 on both 119/110. Personal preference on that one. But There are short cuts to ever job and most dealers would hook the cables up directly bypassing the DP34. I personally hook up to 119 find it then hook up 105 and peak it out. then i un-hook the calbe and hook all three leads up to DP34 in an order if you want and run a check switch.  If you have a good meter ie birdog you dont have to do anything but find and lock on to 105/121 and hook all the leads to the DP34 and go inside and run check switch. But like i said if you have found 105/121

IT DOES NOT MATTER IN WHAT ORDER YOU HOOK UP THE LEADS GOING TO THE DP34 ON THE SUPER DISH AS LONG AS YOU DO A CHECK SWITCH AFTER YOU MOVE THEM. Try it on ur own change them on the DP34 and run a check switch and it will find all them it will change the order on the switch and work fine.

I hook mine up one way and another good installer hooks his up another way and they both work fine.
 :D
[/QUOTE]

Verification

Search

Search

Reply to thread