Ku LNBF - receiving signal

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

i4tas

SatelliteGuys Pro
Original poster
Sep 10, 2005
791
4
Northern USA
I am using a 0.3dB Universal Ku Single LNBF on my 7.5 c-band satellite dish. I was able to receive only a few channels on G-10R and could only find signal on that sat.
I found "PiTV" 11718, 26800 [V] PAC1 was the only unencrypted channel, 15 encrypted.
I also found channels on "EJN" 11819 [H] 21000 4 encysted (Channel #1, Channel #2...)
I found 3 other transponders all with no channels
Signal was around 50-60%
I am in the Midwest, 87 is true south.

I was never able to find echostar 9 (121) which should have strong signal.

Here is a pic on my lnb, does anyone know where the vertical and horizontal lines are? are they parell with the sides of the lnb plastic casing?
 
Last edited:
Its all about the focal point from your dish to the LNB, your type of univeral LNBF is not capable to use on the C band dish. Even use on the regular 1 meter dish, if the focal pont is too far or too close to the dish, you do has the same problem.
 
sksatellite said:
Its all about the focal point from your dish to the LNB, your type of univeral LNBF is not capable to use on the C band dish. Even use on the regular 1 meter dish, if the focal pont is too far or too close to the dish, you do has the same problem.

Makes sense, but why do i still receive some signal?
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)