quantum msr model 1500

Status
Please reply by conversation.

bsnrhans

New Member
Original poster
Jul 23, 2005
2
0
My FTA MPEG2 IRD (DVB) is a free-standing box that I will use for one channel only from AMC-6, downlink 4040 MHz, which is the digital transmission from NASA-TV.

Problem: The signal bar graph reads 93, but the SIGNAL/NO SIGNAL panel reads NO SIGNAL, and of course there is no picture on the TV.

I don't know if "Quantum" is the manufacturer, or a brand name.

Any help, or disucssion, would be welcome. rhansen@bsn1.net
 
Register to hide this ad
Try turning it on and off. If that does not work try another transponder, Sat or band to see if the unit still works

bsnrhans said:
My FTA MPEG2 IRD (DVB) is a free-standing box that I will use for one channel only from AMC-6, downlink 4040 MHz, which is the digital transmission from NASA-TV.

Problem: The signal bar graph reads 93, but the SIGNAL/NO SIGNAL panel reads NO SIGNAL, and of course there is no picture on the TV.

I don't know if "Quantum" is the manufacturer, or a brand name.

Any help, or disucssion, would be welcome. rhansen@bsn1.net
 
Status
Please reply by conversation.

MPEG receiver w/ C/KU band

Another question... (winegard)

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)