This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

RF Remote

Status
Please reply by conversation.
D

davemich

SatelliteGuys Family
Original poster
Feb 8, 2006
83
0
SW Lower Michigan
I bought an RF remote for an HR24 and followed all the instructions and the remote does not work at all. The final step is to type in the last 4 of the RID number but I get nothing. I reset and tried again several times to no avail. Can anyone lend an assist? Thanks in advance.
 
Is the RF a DTV remote or a third party brand? Some RF remotes, though cool, wont work under RF mode with DTV boxes. They would work using the old "Line of Sight" method though.
 
Dave,

Try this :

To reset all the functions of the remote control to the
factory defaults (the original, out-of-the-box settings),
follow these steps:
1. Press and hold the MUTE and SELECT keys at the same
time until the green light flashes twice, then release
both keys.
2. Using the number keys, enter 9-8-1. (The green light
flashes 4 times.)
 
The on-screen instructions walk you through the entire process. I was surprised how easy it was to reprogram a new remote control, though I did have re-program the DVR and AVR settings as well.
 
I will be headed to the customers house today and will let you know. By the way, I meant to say last 6 digits of the RID number...my bad.
 
Status
Please reply by conversation.

Similar threads

Can't find remote code for my TV
Replies
7
Views
708
WinterWinds
J
Remote Setup
Replies
1
Views
788
raoul5788
DIRECTV RC80 Remote
Replies
1
Views
1K
Jimbo
  • Locked
shut off both boxes at the same time how do I set it up to have both boxes to shut off separately with remote?
Replies
4
Views
721
raoul5788
C
Channels change themselves without touching the remote. Directv Stream with ospray devices.
Replies
3
Views
1K
primestar31
Menu
Log in
Register