This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

StarTrak with Polar Axis

Status
Please reply by conversation.

trommy

SatelliteGuys Pro
Original poster
Jul 22, 2006
156
0
Nova Scotia
This has only one coax connection.The neighbour of the former owner said it was around 10 yr old.It has these 3 sets of numbers:25/80/35 *K.Can someone tell me if it's C band only?I just discovered when I switch from a V to a H tp that the 'probe/antenna' stays in the 2 o'clock position.Any suggestions?Thanks
 
I am pretty sure it is c band only. For polarity/skew, you need to hook up the 3 wires coming out of the servo(off blue cube) red =5 volts, white= pulse, black=ground.
An old analog receiver or some Pansat models will operate a servo (3500 for sure, that's what I use)
 

yup, feed is a single Cband with servo...

how big is the dish?
 
You should have the DMX741 pretty soon. I got an order in less than a week. The blue box on the old feed should have three wires on it. Red -Power +5v, white - Pulse, and black - ground. (might have all faded to an off white color) Takes an old analog receiver, or some Pansat models(I used a 3500), to run it.
 
There ia a small square recessed hole on the underside facing the dish and,using a mirror,I can see only 2 wires about 18AWG.They are cut off flush and no doubt the 3rd is there too.I think I'll go out and remove the LNB.Thanks again.
 
Did yours come from HyperMegaSat?What part of the continent do you live in?("7-14 days to Canada".)Thanks
 
Status
Please reply by conversation.

Similar threads

M
Polar vs Az/El Mount
Replies
9
Views
659
FTA4PA
Position keeps changing with new actuator
Replies
15
Views
947
N6BY
Need help receiving PBS on 99W with my setup
Replies
11
Views
1K
Long Hair
Just put up my dish 4feet with polar mount
Replies
16
Views
3K
FTA4PA
Polar mount
Replies
3
Views
2K
Cham
Menu
Log in
Register