Superdish problem: 121 even transponders

[wingberm]

Following a power outage we had in the neighborhood, I lost all channels. Following normal procedures, I unplugged the receivers for 15 seconds and turned them back on. I got back most of my channels, except for local stations.

Now it appears I am getting good reception on 110, mostly good reception with 119 (with some occasional signal loss and pixellation), but on 121 only the odd numbered transponders are giving a signal. The even transponders on 121 are registering no signal. My locals appear to be wanting transponder 8 (even).

The receivers were on surge protectors, but something is obviously wrong. Any suggestions where I should start troubleshooting?

 

[gredneck]

unplug the receivers and then unplug the switch (if powered) wait 5-10 minutes
plug in switch (if powered) then plug receiver 1 back in, let it aquire signal run check switch if it works then receiver 2,3, etc.

had this happen to me on thanksgiving day, kids missed the parade, wife looked.....,
punk ass step son says:"this doesn't happen with digital cable"