Loss of signal, burned connector

Status
Not open for further replies.

mcastles

Member
Original poster
May 5, 2015
8
0
CT
Hi

new to forum and need some advice. Recently I have experienced loss of signal message. When checking the signal in setup, every transponder on 101 is either zero, or every other transponder reads zero. Further investigation the RG6 fittings is warm and burned to the point of no connection. I have an H24 receiver and 5 LNB HD dish.

I unplug the receiver and replace the fitting with another compression and it works for a while, then same thing, no signal and compression warm to the touch.

I am out of ideas, thanks
 
Hi

new to forum and need some advice. Recently I have experienced loss of signal message. When checking the signal in setup, every transponder on 101 is either zero, or every other transponder reads zero. Further investigation the RG6 fittings is warm and burned to the point of no connection. I have an H24 receiver and 5 LNB HD dish.

I unplug the receiver and replace the fitting with another compression and it works for a while, then same thing, no signal and compression warm to the touch.

I am out of ideas, thanks


P.S. Just moved thread to Directv forum, sorry didn't realize
 
Status
Not open for further replies.

SatelliteGuys Store

Amazon Link

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)