Quali-TV 1080i

well lets put it this way

There are more 4:2:2 feeds out there than S2. That was the reason right there. I was sick of not being able to see 4:2:2 feeds
 
Recording from the Quali-tv QS 1080 IRCI

To record from the Quali rx the video phono skt is available but the quality is not that good so to improve on that quality here is an idea that I use for both PAL Video & NTSC Video.

To Record via RGB for PAL Video
RGB HV SCART
1 red ........................................ 15
2 green .................................... 11
3 blue ....................................... 7
Video/Sync phono skt ............. 20
Gnd 5,6,7,8 .............................. 5,9,13,17,21
___________________________________

To Record via S Video for NTSC Video
SAT RX S VIDEO
Video phono skt .......................... 3
Y ................................................. 4
Gnd ............................................. 1 & 2
_____________________________________

Audio
L+R
Phono skts
_____________________________________

Video Format should be set to either PAL or NTSC 480i
 
I know this is an old thread, but with MeTV moving from 87 W to 101 W this month, I have been trying to scan it in on my QualiTv. MeTV is already up on 101 (AMC-4 on the QualiTv). Using 4013 MHz 5923 SR V, I get a lock with brief audio and video, but it won't scan in for me. Has anybody else been successful?
 

Comparison test and review of ESX521 and JSC321s Ku LNBFs

OpenBox S10 MPEG-4 HD receiver review

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 2)