Hopper 3 and Wally

[roadfire]

Currently have a Hopper 3, 2 joeys, and a wally (at a second location) I want to swap the wally for one of the Joeys., and get rid of both Joeys. is this a direct swap? Just disconnect cables form Joey and connect to Wally?
Thanks

 

[TheKrell]

is this a direct swap?

Nope.

Just disconnect cables form Joey and connect to Wally?

The Wally needs a satellite feed just like the Hopper. To do this, you will need a DPH42 switch.

 

[roadfire]

The joey already has a satellite cable to it ( not wireless) I'm guessing the DPH42 switch gives power to that cable?

 

[TheKrell]

The joey already has a satellite cable to it

Sorry; it's a MoCA cable from the Hopper and not a direct satellite feed. You need to go from your DPH LNB to a DPH42 switch. From the switch, then one cable would go the Hopper and another cable to the Wally.

This is what I believe is necessary from reading other experts here. I never had a Wally and do (or did) have an H3 and 2 J3's just like you do (or did).

 

[tjboston5676]

It would look like this except just one wally and no splitters. The second port on the right side if switch would go direct to the wally.

 

[roadfire]

Ok thanks for the replies. guess ill look out for a DPH 42 switch