Recent content by DREAMFOX1

  1. D

    Local KXLT Digital Stations Can't Be Picked Up with Digital Antenna

    Have you tried rescanning for channels with the AMP boost off. Amps cause problems locking on to channels.
  2. D

    NEW TO THE AREA OF KU/C BAND LNB ON A MINI BUD

    looks good should be able to lock on to something up there :)
  3. D

    NEW TO THE AREA OF KU/C BAND LNB ON A MINI BUD

    Check this link: http://www.satelliteguys.us/free-air-fta-discussion/207513-1-2-meter-minibud-modified-scalar.html
  4. D

    1.2 Meter miniBUD Modified Scalar Ring

    Using an original SG2100 to its limits. Still works but don't know for how long. Going to upgrade the motor as soon as possible to a metal gear version. As to what i can see.....well all i can say is alot of good stuff:D
  5. D

    1.2 Meter miniBUD Modified Scalar Ring

    Good to see this idea still alive :) Going to venture into DVB-S2 territory to see what i can catch.
  6. D

    Is it possible Ku to C band?

    The bare minimum is 39 inches for some C band Check this thread out. http://www.satelliteguys.us/free-air-fta-discussion/146059-primestar-84e-bsc621-2-lnbf-experiment.html
  7. D

    High-Def Analog Cband

    Its clear because you are seeing 480p instead of 480i. Thats the beauty of a feed.
  8. D

    Trouble Finding 61.5W Satellite

    Check if you can lock on to 110 or 119 using that same dish. If you cannot get a signal, it might be the coax cable connected to the lnb has gone bad.
  9. D

    Primestar 84E/BSC621-2 LNBF Experiment

    Wondering if satcom1 is still testing his primestar dish.
  10. D

    can i get satmex 6 or 5 in 4 footer dish

    Try to reverse the polarity of your lnbf. It should give you some more channels and transponders. Check out the "Primestar 84E/BSC621-2 LNBF Experiment" thread on this forum. Lots of info and testing listed. I can get most of satmex 5 & 6 with my 39in dish. And alot more with its...
  11. D

    Primestar 84E/BSC621-2 LNBF Experiment

    Its alive again I finally reinstalled my 1.2 m dish with a new SG 2100.:cool:
  12. D

    SG 2100 Issues

    All new SG 2100 have the same problem. Had to reinstall my old SG 2100 because of this problem.
  13. D

    SG 2100 setup What is my true south satellite?

    Will the sg 2100 be at zero mark when its aiming at 119?
  14. D

    SG 2100 setup What is my true south satellite?

    Thankyou:up So this is the satellite that the motor needs to be aiming at the zero mark? If so that explains why my angles are way off.