Recent content by fta4life

well i have figured something out, remember I am blind here on the screen, but I tuned in the skew on 99 to get the 85 pct quality, I saved it with the mem button on the panel, now when I switch to horizontal and back it goes back to the original 74 pct, i press call on the remote and...

yeah I save sats with the mem button on the receiver. I tried to save the skew but it still goes back to 0. For instance on the 99 sat on the abc net feeds on the vertical side when i drive the dish there it is at 73-74 quality, even bumping the dish which is good and actually very high...

yeah the funny thing is when i connect my ku dish up to the ku input it will show the fuzzy screen, as there is no analog up there for ku, however it still wont pull the menu or any other text up on the screen. on the c band side it just stays black with audio, i was able to listen to the...

No, this receiver here will not work on the tv screen, just audio. I think the video board is out, but I dont use it for signal anyways as I plug the lnb from the dish straight to the micro and then just run the motor and polarity off the analog receiver. What I was wondering is do most...

I am having a little skew issue., The receiver I am using it an uniden presiedent and i am using it for both motor control and polarity. I cant get into menus because the video will not show up on my tv for the analog receiver so what i did by using the front panel was program all sat...

also there is not alot east of 91 until you get to 72 AMC 6. the bird on 89 has some cbn feeds, and a few scrambled channels, the SES bird on 87 has to be very fine tuned to get the retro mix of 30 or so channels, then on 83 the signal is quite weak, for me anyways.. I get the P.A...

On the Micro Hd I am locked on at 73-75 pct quality which is high for a micro reciever. I know sometimes tps on that bird can be a little edgy though, you pretty much have to be spot on to pick them up.

I use birdog meters and actually have an extra for sale if you want it just p.m me.

first off i dont judge anyone because I think at some time or another a good majority of us on here have hacked things including satellite. i agree with the site not wanting to talk about it because they dont want to get shutdown and neither do we want that. With that being said people who...

yeah this one will do that and then say by source on the video and then a min later be locked in and functioning. However it is plugged straight up to a c band lnb, no switches or anything so I am confused as far as that goes.

Ok I have to first off say that with my ku motorized system the Microhd has been the best receiver I have ever had. Hands down! I seem to catch alot more than I have with any prior receiver. However since installing my 9 ft Bud and getting it connected to the micro I have noticed some...

well basically my setup is this c band dish motor and polarity wires run straight to analog reciever coax from lnb straight run to micro hd not to analog reciever ku dish cable running straight from motor to microhd reciever what i am trying to do is have the two cables combine into...

Getting s2 feeds on most tps now. gonna take some tweaking.

I am tuned in pretty well so far on my 9 footer but i notice quite a bit of s2 signals are showing 10 pct quality like the 87 luken mix and i am not scanning them in while most regular stuff is in the 70's on my microhd. Any of you have problems locking the luken channel mix? Thanks

yeah i found out it wasnt the tv, lol. For some reason on the screen it only shows when I hit the timer button and it says Sunday 12:00 a.m, it wont let me do anything and when I hit the menu button or settings nothing pops up on the screen even though the remote is working, so I can use...