Recent content by scsttrooper

  1. scsttrooper

    OTA Not Saving to Guide (SOLVED)

    I do not know about the H3. My experience is with the Wally receivers in my RV. The issue was repeatable (and fixable) on both of my Wally receivers. Sent from my SM-N975U using the SatelliteGuys app!
  2. scsttrooper

    OTA Not Saving to Guide (SOLVED)

    Ok everyone. This is for informational purposes as I have already figured out the issue. Here is what happened. I have two Wally receivers in my camper that each have an OTA. I travel quite a bit and have never had an issue until yesterday when I arrived in Kansas City, MO. When I scanned for...
  3. scsttrooper

    Will this LNB work with Two Wally's

    Here is another LNB that I already have. Would it work without the "splitter"? Sent from my ONEPLUS A3000 using the SatelliteGuys app!
  4. scsttrooper

    Will this LNB work with Two Wally's

    What is a stackable splitter and are they commonly avaliable? Sent from my ONEPLUS A3000 using the SatelliteGuys app!
  5. scsttrooper

    Will this LNB work with Two Wally's

    Ok... So it doesn't work. The receiver plugged into port 1 makes it to the activation screen but the receiver on port two does not. The second receiver has the message that you see in the attached picture. I believe that this is the wrong LNB for two wallys. Sent from my ONEPLUS A3000 using...
  6. scsttrooper

    Will this LNB work with Two Wally's

    Thanks for the quick reply and help! Sent from my ONEPLUS A3000 using the SatelliteGuys app!
  7. scsttrooper

    Will this LNB work with Two Wally's

    Will this LNB allow me hook up two Wally's? If so will I need anything else or just a coax from each Wally to a port on the LNB? Sent from my ONEPLUS A3000 using the SatelliteGuys app!
  8. scsttrooper

    2 Wallys Only - What Do I Need

    So.... I did swing way to the right and couldn't find anything. I had the elevation and skew set exactly as my home (and per the dish instructions) just a few miles away so I didn't think that I needed to adjust either. I had to raise the elevation several degrees to find the 72.7 sat. With...
  9. scsttrooper

    2 Wallys Only - What Do I Need

    Ok.... So I got it all up and going!!! First let me say that the Super Buddy 29 is a GREAT asset. If you are going to put in a dish and can afford one then by all means it is a HUGE help. As for solving my issue... I first put the super buddy on my dish and still could not see 72.7. I did...
  10. scsttrooper

    2 Wallys Only - What Do I Need

    I will have the meter tomorrow. After I check it all out I will let y'all know what I find.
  11. scsttrooper

    2 Wallys Only - What Do I Need

    The meter that I purchased is a used Super Buddy 29
  12. scsttrooper

    2 Wallys Only - What Do I Need

    No I agree with you. I actually found a Sat Buddy for sale locally and will try to pick it up tomorrow. I've aligned quite a few dishes in my day without one but this is kicking my tail. At first I thought it was an issue with the Wally not liking the LNB but now I think it's an LNB issue. I...
  13. scsttrooper

    2 Wallys Only - What Do I Need

    Ok... I've peaked and peaked and I have 61.5 at about 55~58 on the dish diagnostics page. No matter what I can not seem to get 72. I have swung and aimed gone higher, gone lower, and tried different skews. I am about to think it's a bad LNB. Is there any way to test the LNB to verify that it...
  14. scsttrooper

    2 Wallys Only - What Do I Need

    I've been thinking about that as well. The dish was an old leftover that I collected but the LNB is new. I noticed a "W2" on the LNB support arm as you can see in the attached picture. Does this mean that this is most likely a Western Arc reflector? No matter what I can not get 72... Only...
  15. scsttrooper

    2 Wallys Only - What Do I Need

    Sorry... Plumb... Not level. Sent from my ONEPLUS A3000 using the SatelliteGuys app!
See more
Top
Back