Search results for query: *

Check out solidsignal.com The gain is indeed the amount the signal should increase - in a perfect world. Distance, trees, hills and other obstructions lessen this value.

Splitters reduce the amount of signal, and in areas where you have a weak signal every bit of signal loss hurts. An amplified signal starts by adding a preamplifier to your outside antenna. The indoor amplifier powers the preamp and pulls this amplied signal through your amp to wherever you...

Maybe the solution to my woes can help you out. First, if you are using a dish and combining the OTA signal with a diplxer - DON'T. Run two separate lines. I have to amplify my OTA signal as I live in a fringe area. Here's my simple setup: ChannelMaster 3020 antenna > ChannelMaster 7777...

Alan Am I to understand that after the analog shutdown, all of the Tallahassee area broadcasts will be UHF? I thought VHF was the better choice and it appears there will be no broadcasts in the VHF realm. WCTV-46 WFSU-32 WTLF-24 WTXL-27 WTWC-40 WTLH-49 WFXU-48 Scott

Alan Thanks for the response. I guess that I found some posted misinformation. It stated that WTLH-HD, along with WTWC-DT (NBC), WCTV-DT (CBS) and WTXL-DT (ABC), all brodcast at 1000kW. I figured if I was getting one I should be getting them all. Obviously some powers are way up or Fox's...

I am using a Channel Master 3020 with a Titan2 7777 Amplifier. No diplexer - two separate lines running to the D10. I receive all of the other local channels, they broadcast from approximately 30 miles away in the same line of sight. I get Fox49 clear as can be, but don't seem to get the...

While setting up my local HD channels through my DirecTV H10 I am getting the "Station Not Available" message for one of the local broadcasts (WTLH-DT 50.1). I can receive all of the other local HD brodcasts - all appear to be in the 1000kW, including the one in question (the receiver even...

Thanks again, Kevinw. Followed your advice and ran separate lines. Works great.

Thanks, Kevinw. One more thought/question. I run my RG6 through a surge protector before it gets to any equipment. Any problems here?

Lowes it was! Very limited to our Channel Master dealers here in South Georgia. So am I to understand that the diplexer diminshes the effect of the amplifier? And if so, how? Just trying to get a better understanding of the situation.

Decided to start over with the OTA antennas. I replaced my old RadioShack VHF/UHF with a Terk 44 and was gettting several stations "okay" and one of them HD. Since all of my local HD stations are broadcasting from the same degree (+/- 1 degree) I decided to upgrade and get a little more...