Search results for query: *

  1. kevnt63

    Loss of all signals in PR

    Lost all WA signals for about 10 mins here in Central Missouri. 61.5 was fine. All back working now.
  2. kevnt63

    Updated Apps (Pandora Radio and Facebook)

    Yes, after a few minutes screen will dim and the album cover moves around screen.
  3. kevnt63

    Quick question, while my installer is here.

    Yes, a duo node needs 3 inputs from sat
  4. kevnt63

    Latest Eastern Arc Satellite Issue Update

    Springfield, MO DMA was on 72.7 until about 30 min. ago. Now guessing they have been moved back to 77. Back out in the snow to repoint wing dish now.
  5. kevnt63

    Help!

    You have to have a DP lnb to work with the DP 3:4 switch....an older legacy twin will not work with the switch.
  6. kevnt63

    2800 with DP32 switch and Dish 1000

    If the DP Adapter is hooked up correctly the 2800 will show being hooked to a SW64 switch after the check switch is run.
  7. kevnt63

    lots of credit! :D

    DHPP is Dish Home Protection Plan
  8. kevnt63

    Dish 1000 and Adding 61.5

    No, you will need a DPP 44 switch to connect all 4 sat locations and will need 4 lines running from the lnb's to the switch, one for each sat location.
  9. kevnt63

    Can't sell 942 b/c dish won't offer hd programming to new customer?

    NO.......once you activate your 622 w/new metal pkg your 811 will no longer receive the HD programming, only SD will be received.
  10. kevnt63

    Update-DPP44 and Power Inserter

    If you have an electrical outlet close to the DPP44 you can move the 625 to port 4 and just run the power inserter on port one without a receiver.
  11. kevnt63

    Sound No Picture

    no....switch to that input, then you can see menus to change hd setup
  12. kevnt63

    Sound No Picture

    hook up the regular rca jacks (yellow,red,white) to the receiver and to tv and use that output to fix the aspect ratio on the receiver.
  13. kevnt63

    Reception problem Dish 500

    Have you ran a check switch test on the 322 Receiver? and if so, what was the results?....on the signal strength screen, when switching between 110 and 119 sat, if it does not turn green and say locked for 119 there is a problem with the sat feeds.
  14. kevnt63

    Reception problem Dish 500

    There is no switch built into the 322 receiver. If you are using Legacy dual LNB's you have to have a SW21 Switch to combine the signals from the two LNB's. Your problem is one input on the receiver is seeing 119 and the other is 110....both inputs need both sat feeds to work.
  15. kevnt63

    Reception problem Dish 500

    What type of cable is run from the LNB to the Receiver?...is it RG6? Did they run new cable or use any existing lines? If there is RG59 anywhere between the LNB and the Receiver that can cause that type of problem also.
  16. kevnt63

    Any 322 receiver troubles?

    does it show the top banner for the channel and just no video and audio?....if so, you can try this.....go back to the signal strength screen and check both sat, 119 and 110, make sure it says locked and the name of the sat before changing.....then cancel back out and see if the video/audio...
  17. kevnt63

    Dish Pro Plus diplexor question

    connect the seperator sat 1 and sat 2 inputs to receiver sat 1 and sat 2 inputs, from LNB line connects to sat port on diplexer at tv2 and the single line you show from diplexor to receiver sat 1 input should be between the two single ports on diplexers.
  18. kevnt63

    Dish Pro Plus diplexor question

    I assume you are using a DP Seperator with this set-up also, you run the sat feed into the single port side of the diplexor, then the sat feed port on the diplexor into the single port side of the seperator, then the tv 2 output goes to the uhf/vhf port on diplexor. The 2nd diplexor has the...
  19. kevnt63

    Dish installer says satellite cannot be installed.

    If this installer is a DNSC tech then his supervisor should have to verify the no line of sight issue.
  20. kevnt63

    IMF to launch Today at 5PM

    It is on AT120....ch 157
  21. kevnt63

    522 Tuner 2 not aquiring signal

    Do you have 2 seperate lines coming from the dish to the 522? and are they both RG6?
  22. kevnt63

    Picture getting worse...

    sounds like the dish is not tuned in properly.....getting poor signal strength if it is happening on all channels.
  23. kevnt63

    Wall Fish Custom work or Not?

    Wall fishes are considered part of the standard installation and are not charged for by Dishnetwork.
  24. kevnt63

    Using diplexers with a DP34 switch

    When hooking a dual tuner receiver to a DP 3:4 switch, you must use either ports 1 & 2 or ports 3 & 4 for the dual tuner.
Top
Back