Search results for query: *

  1. Trust

    Transformer for MOTECK V-BOX II

    All the Moteck /Strong and other named V-boxes I have seen , were provided with 2 secundairy voltages , for 12 v and 36 v Sometimes there is a temperature fuse under the isolation , maybe switched off .
  2. Trust

    replacing reed sensor with hall sensor

    With a optical sensor , the making of a pulswheel is far more easier (I think) This one was made for a AHM36 H2H rotor to let it work for Usals .
  3. Trust

    How should I mount standard KU LNB to Channel Master Ku round dish?

    RimaNTSS , does this one also has a different openings angle ?
  4. Trust

    How should I mount standard KU LNB to Channel Master Ku round dish?

    Looks like a Prodelin dish , about the lnb position , see the pict. of my 890 @ Ken2400 can you show a full picture of the backside ?
  5. Trust

    Still searching for a HN9200 Ka lnb

    Since searching for a HN9200 ka lnb did'nt help , I post the request again . To make a more universal lnb ( H/V - RHC/LHC ) by rotating that HN9200 its more suitable than the Direct SL3K lnb that I already have .
  6. Trust

    Do they make this LNBF?

    Old picture of C- circ / C-lin / KaKu combi / Ku lin / Ku circ / SL3K at 1.8 m Channelmaster Now also a modded Ku lnb attached for EsHail 25.5º E (10.300 - 10.700 Mhz)
  7. Trust

    CONTEST!! Titanium ASC1 Appreciation Give-A-Way

    I've learned a lot from his answers and had my profit off it. I wont say EOL(end of life) they still goes on , more EOP (End Of Production) Thanks Titanium Satellite !
  8. Trust

    Multi LNB single dish

    Here in Europe we have for lineair signals UNIVERSAL DUO lnb's for 19.2 and 23.5 E for 60 cm and other ones for 80 cm offset dishes Also TRIPLE versions for 19.2 and 23.5 and 28.5 E
  9. Trust

    searching for a HN9200 ka lnb

    I'm still searching
  10. Trust

    When to use a 22KHz switch

    @ Nyandua , Some pictures of the dish would help
  11. Trust

    Birdview Satellite Dish Conversion to Titanium Satellite ASC1

    Look for EGIS in Germany they sell autotrack rotors 360º AZ / 90º ELV I have used a 180º / 40º version long time ago , not the one at the picture . Before you look for the pricelist , find yourself a solid chair .
  12. Trust

    Gas station dish

    Thanks Rima , good to know !
  13. Trust

    Gas station dish

    I do have some doubts about being a Channelmaster , the side arm are attached at the side of the dish , not in frontside of the dish . Its looks almost round , could it be a Prodelin ? I do have such 890 mm dish
  14. Trust

    USLAS Motor Setup

    After tightening sometimes you must correct the motor elevation since tightening the poleclamps , the motor carrier wil be bended
  15. Trust

    Weak diseqc rotor assistant

    The empty rotor has a current of 130/150 mA . Added the springs , each time one spring is almost idle when the rotor is in that end position , and the other spring has a load of ± 100 kg When the rotor is at Zero , both springs had a load of ± 25 kg Turning to 70º E with 290 mA , back to zero...
  16. Trust

    Weak diseqc rotor assistant

    Nice story , never read it before .
  17. Trust

    Weak diseqc rotor assistant

    I like to see pictures of your system .
  18. Trust

    Weak diseqc rotor assistant

    #1 For a diseqc rotor behind a heavy dish with several lnb's , its hard working to bring it back from a far east or west position . To help the rotor doing that , the STAB rotor has a system with spring inside . I've never seen such system in any other rotor , so I thought about making that for...
  19. Trust

    Twoteck Twinrotor

    Well Alexander , I do have some tools like a lathe , drill , cutting and welding equipment , all nessesary for the job . With all those tools its not hard but fun to make these rare parts . Also some knowledge of electronics and solder skill is needful . Grtz Wim
  20. Trust

    Twoteck Twinrotor

    For use of a 1.2 m or 1.5 m dish a common diseqC rotor won't last long . So I made the Twoteck . A idea from long time ago but never found the time to make a start . Two identical disecq rotors at one shaft , solid enough for heavy 1.2m ChannelMasters and 1.5m Gibertini / Laminas dishes . Its...
  21. Trust

    where can i get a new diseqc motor

    maybe two will do .
  22. Trust

    KU band reception without a dish

    Pictures made at : ? ?7 ?oktober ?2011, ??15:08:34
  23. Trust

    KU band reception without a dish

    Tried it looooong time ago (analog time) with only the feedhorn of a FIBO gregorian dish pointed at ASTRA 19.2º E Got me picture with a lot of (colored) sparks .
  24. Trust

    Project Four Leaf Clover

    Thanks for sharing your project , like here , nothing to loose by the use of old parts and walking beside the line .
  25. Trust

    Contest: Dr. HD Satellite Meters - Two Winners

    I posted it here some time ago , in the end it did not give me the result I hoped for . Project Four Leaf Clover
Top
Back