.If your receiver wont do DVB-s2 then you wont get RTV.
I am still rather new at figuring out most of this fta setup.. I've done pretty good in that i've been able to find 97w by just pointing and moving the dish manually... i'm trying to do the same for the 87w satellite. I would really like to have the rtv if i can. I'm using a starchoice dish to get the 97w but i also have a bell dish and an old (original) starchoice dish beside to use for the 87w test. I'm in the St. John's Newfoundland area (cbs to be more precise). I've found the data i need for my area ( 26 elevation 222 north and 27skew).... I'm still a little confused though: should i be trying to get the ku 87w feed? i'm thinking i should since i don't have a large c-band dish... and is this even possible (using ku starchoice or bell dish) with 87w from my location? The footprint seems to suggest it is possible. I'm trying to get all the needed info to set this up right so any advice is welcomed... settings: 3800 H , SR: 29125-5/6 is there anything else i'm missing? i'm also using the reciever: cw600s CaptiveWorks .........thanks for any help.
you need to get 83w if you're trying to get RTV on Starchoice/Bell dishesThank you for the information. I am still wondering: if i can get bell with subscription on 91w / 82w , would it be reasonable to think i can get 87w since it's between?
you need to get 83w if you're trying to get RTV on Starchoice/Bell dishes
RTV on 87w requires big 8-12' dishes
If you subscribe to bell and can get 82 you hould be able to 83
you need to get 83w if you're trying to get RTV on Starchoice/Bell dishes
RTV on 87w requires big 8-12' dishes
If you subscribe to bell and can get 82 you hould be able to 83
Don't know if you saw my recent post, but I receive all the RTV channels (4080H) just fine even in DVB-S2 format using a 4' Channel Master dish here in Pittsburgh, PA. Signal is a solid 82%.
Coming SOON Mr. Luken will begin broadcasting all national feeds of his stations in DVB-S format! He is doing this as he see's a lot of SatelliteGuys members are having issues tuning into his DVB-S2 Signals and in addition he believes that television should be FREE.
well on 137W there are placeholders but no channels yet
137W
4080
H
25195
DVB-S
Channels log in as
TUFE (tuff tv)
FTVE (my family tv)
PBJE (PBJ)
FGOE (unknown????)
LUC2 (assume test card)
RTVE (RTV)
QC1 (assume another test card)...this one is MPEG4. Pansat logs it as radio but Manhattan logs it as a TV channel