Gremlins and weird wonkiness

[Magic Static]

I have a dual ortho BullsEye II and I noticed I lost all vertical Ku today. I'm using a modded WNC4x8 multiswitch to power the LNBs.So I thought I would check it out. Found 18.36v output at the KU V terminal. So I hooked up my meter to the coax going to the LNB and got good signal. Well put it all back together and now it works. Well I don't believe in things that fix themselves, so I'm wondering what's the culprit here. The Eagle Aspen LNB, the WNC switch, cabling????? An another note( I must be psychic) I found a smoking deal on a pair of Norsat PLL KU LNBs (used) on ebay two days ago. 1208HA $100 cheap Can't wait to see how they work

 

[toucan-man]

...I found a smoking deal on a pair of Norsat PLL KU LNBs (used) on ebay two days ago. 1208HA $100 cheap Can't wait to see how they work

LUCKY STIFF

 

[Anole]

LUCKY STIFF

Yea, really.
Use 'em on your 10' Winegard & microHD and try some of that elusive 32apsk.

As for the gremlins, chalk it up to a connector.
If it returns, we'll get more serious.

 

[truckracer]

You could try eliminating the switch if it does it again. Hook the receiver directly to the vertical lnb. Most lnb's will still operate @13v.