Ok - I have a VIP 222K with a 1000.2 EA dish and I was able to finally get 72.7 in at 60% but no matter what I do I can't get the Sat at 61.5 to come in. I have the dish set at the numbers as specified in the installation book except I had to raise the elevation slightly to get 72.7 up to 60%. I tried changing the skew slightly as I read somewhere but still nothing. When I do a switch check it only shows 72.7. I have a single coax run from the first connector of the LNBF feeding into the supplied triplexer (sp?) and connected to the 2 Sat inputs on the receiver. I noticed that the first output of the LNBF is labeled 72.7 and the 2nd 61.5 - would I be better off doing a 2 coax run from the individual ports to the 2 inputs on the receiver. It seems that 61.5 is mainly locals but I also noticed channels missing (I got the promo that gives me the Everything package at the 250 price so all channels should be available). ANY hints,tips,techniques would be GREATLY appreciated!