How to gang up receivers

[roosman]

Hi Again

I want to be able to use either my coolsat or twinhan to tune signals. The coolsat will be for feed hunting/blind scanning. The twinhan will be for HD and 4:2:2 etc.

Will this work

LNB ----> Coolsat --->Twinhan

or is this better

LNB ----> Twinhan --->coolsat

Do I leave LNB power set to on on both or do I shut off the lnb power on one of the units?

Thanks

 

[Mr Tony]

Use the Coolsat to aim the dish and tune signals.

The 1st option is the better of the two....or get a dual LNB and run a line to each tuner

Leave LNB power on. The PC card will only see the same polarity as the Coolsat when the CS is on