How to use USALS on Invacom QPolar

Status
Please reply by conversation.

weighman

Active SatelliteGuys Member
Original poster
Apr 17, 2008
16
0
How do I use the USALS to move the motor on the Invacom Quad Polar? I have set things up fine on the linear side, but if I want to use the circular and move the dish, how do I wire this up so both L and C move the dish???
 
As Qwert said, cable from your receiver to the motor FIRST. Then from the motor lnbf input to a Diseqc switch or a 22khz switch. Then cable from 2 inputs of the switch to an L output and a C output of the Invacom lnbf. That's the long way of saying it, I know .
 
Quad Polar and Motor

Thanks guys.

I set it up and it works great!


I get all sats between 91 and 148 now. Im in an apartment building so I cant get and LOS past these points. But its working grrrrrreat!
 
Interesting....

Would this be the same wiring hierarchy if using a C-band motor/mount, Primestar 1m, fitted with the Invacom 031 CLCL LNB.....driving with a V-Box?
 
Status
Please reply by conversation.

n00b diseqc config question

Quad LNB

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)