Luken MUX on 137.0W

Status
Please reply by conversation.

Magic Static

SatelliteGuys Master
Original poster
Lifetime Supporter
Oct 12, 2010
7,498
4,853
Montana
I was tweaking my Laser C/KU dish, and found I couldn't get a peep out of the Luken MUX. But I showed and IRD of 84 on the AI TurboS2. After a bit I discovered the SR and FEC had changed since I had last tuned those in. When did that happen? I must have missed that info on the board here. so I have the mux at
4160,H,29123 3/4 8PSK
 
That is the S2 mux. There use to be a DVB mux at 4080 but that has since been shut off (a month or so ago)
I know on the Manhattan I had to tweak the frequency to 4165 to lock the signal
 
its a glitch on the Manhattan

if you blind scan it shows 4160 H 29125 and logs channels. But to get them to show you have to change the frequency to 4165 to 4170 for signal to show up.
 
Status
Please reply by conversation.

DSR410 Hor/Ver and LNB power problems

Pansat 9500 vs 9200

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)