GEOSATpro MicroHD not controlling a motor

[jmc98]

My MicroHD will not move my 1.2m 90 my dg380 motor any suggestion would be appreciated


Sent from my SM-N900V using SatelliteGuys mobile app

 

[primestar31]

Did it ever work? Have you added your coordinates to the motor menu, and turned on USALS for each position for the KU sats? How are you cabled from the receiver all the way to the DG380? Any switches in that line?

 

[jmc98]

Did it ever work? Have you added your coordinates to the motor menu, and turned on USALS for each position for the KU sats? How are you cabled from the receiver all the way to the DG380? Any switches in that line?

It never worked due to not having usals on each satellite in the micro, thanks for letting me know i have to set USALS for each satellite as i thought this was like other receiver where you set up usals and the satellites were preprogrammed to use usals

 

[primestar31]

It never worked due to not having usals on each satellite in the micro, thanks for letting me know i have to set USALS for each satellite as i thought this was like other receiver where you set up usals and the satellites were preprogrammed to use usals

Nope! This is superior. I wouldn't want one that globally forced you to use one function for ALL sats. I have a mix of motorized and fixed sats, and I want to set them individually. Sure, it takes a little more time, but it's a far more flexible system for future use.