optimize my setup

[silverarrow550]

Hey guys,

excuse me but im another semi nob at this but i could use some advise from you. i have a dish 1000.2 and dish 500 and a large (30" x 34") dish that i was using for 97w and was thinking about re-directing it towards 118.7w. the 30" uses a 11.7-12.75 Ghz LNB high stability ku band

Q1: can i use my big 30" dish to catch 118.7 with it?

Q2: on the 1000.2 dish there is an extra dish input in the lnb for an extra dish link, is there a way that i can combine my 30" and 61.5 dishes to that single input? do i need a different setup, or i just have to choose between my children to plug in there?

i would really appreciate your input on this, thanks

 

[silverarrow550]

any help guys??

 

[boba]

NO to your questions.

 

[srbCARROLLTON]

first of all 118.7 is a low power sat and you need a special LNBF to get signal... secondly no you can not run two seperate orbitals into the in port of your 1000.2... if you want to have five orbital locations i really don't know of a way to do it... I am sure there is but probably not very practical