Weigel Broadcasting launching Start TV Network
- Thread starter vc2
- Start date
- Latest activity Latest activity:
- Replies 62
- Views 6K
- Status
The Start TV test feed went live today. The feed appeared today on my nightly blind scan. The feed is presently simulcasting Decades. Sadly, the feed is not HD. It's 16:9 480p
SES 1 101.0W
3965V 2734 5/6
PID: 02f4 / 02f6 / 0001
I found another feed (presently unidentified but associated with Start TV according to the promo audio). Presently playing Bob Newhart (audio only, no video). Probably an alternate or west coast feed.
SES 1 101.0W
3972V 2734 5/6
PID: 02f4 / 02f6 / 0001
SES 1 101.0W
3965V 2734 5/6
PID: 02f4 / 02f6 / 0001
I found another feed (presently unidentified but associated with Start TV according to the promo audio). Presently playing Bob Newhart (audio only, no video). Probably an alternate or west coast feed.
SES 1 101.0W
3972V 2734 5/6
PID: 02f4 / 02f6 / 0001
Last edited:
to the forum zabo 
I just looked at those feeds and I find them still there , no changes. Nobody else has reported them MIA.
You might try and rescan.
The feeds are present where they should be, but the west coast feeds are weak at my location, about 10-15% quality. Ironic since I'm on the west coast. Good luck.....
Sent from my moto x4 using the SatelliteGuys app!
Sent from my moto x4 using the SatelliteGuys app!
Yes I rescanned many times & still no 4 Weigel + 1 alt. Just get fety, newsy, and grit.
I just looked at those feeds and I find them still there , no changes. Nobody else has reported them MIA.
You might try and rescan.
In further info, I only moved the dish slightly, rescanned, then I finally got them back.
But with a lot of trouble and fidgeting. I do not know what is going on with these channels on this satellite now.
Almost. I think the 101W satellite is playing tricks on me. Or there is some kind of equipment problem on my end.
The problem only seems to be with the 101W satellite. It seems to keep changing on me. I have signal, and then all of a sudden, I do not.
And then some times it comes back afterwards.
But with a lot of trouble and fidgeting. I do not know what is going on with these channels on this satellite now.
Almost. I think the 101W satellite is playing tricks on me. Or there is some kind of equipment problem on my end.
The problem only seems to be with the 101W satellite. It seems to keep changing on me. I have signal, and then all of a sudden, I do not.
And then some times it comes back afterwards.
It could be interference from a sat to either side. To test that next time it happens, move your dish a few clicks to either East or West, and see if they come back.
I have completely lost H & I and Movies. But Me TV blows in like crazy. Wiggle the dish, all other adjustments and nothing or a quick flash of H and I.
Seems odd to me that everything else shows up great except H and I and Movies. Always played great in the past. This problem is on two different dishes and receivers. Both 10 footers.
?????
Also tics me off that Ion is gone....
Seems odd to me that everything else shows up great except H and I and Movies. Always played great in the past. This problem is on two different dishes and receivers. Both 10 footers.
?????
Also tics me off that Ion is gone....
Same here upon checking this am. As I mentioned in my post in another thread it was acting up Saturday evening but everything was fine again by Sunday morning. Looks like we are back to the problems we had on 101W a few years ago.
This is a STB hardware issue related to the chipset and while peaking the dish and feed is advised, it is not related to signal strength or interference.
See: www.satelliteguys.us/xen/posts/4278356/
See: www.satelliteguys.us/xen/posts/4278356/
You could contact a STB distributor regarding a firmware update, but the issues are in the SOC and the chipset manufacturer would need to provide a solution. Very unlikely that that would occur...
As you recall, in the past few years we developed a rather impressive list of receiver solutions on SatelliteGuys and LegalFreeToAir forums that properly displayed these channels and of those that did not... You had purchased a STB at that time to address the unique reception problems that occasionally occur with these channels.
The V7 is a SOC solution and not Android OS.
As you recall, in the past few years we developed a rather impressive list of receiver solutions on SatelliteGuys and LegalFreeToAir forums that properly displayed these channels and of those that did not... You had purchased a STB at that time to address the unique reception problems that occasionally occur with these channels.
The V7 is a SOC solution and not Android OS.
I don't know about you guys, but I just ordered a V7 HD receiver... They claim to have them in New York, but I suspect it'll ship from China.
I'd love to find a receiver that plays these channels solid, plus regular ones, and also has the good 30 second skip, plus dvr file position tagging that the old SatAv MicroHD has.
I do extensive recording, and the MicroHD is getting a little old. I bought an Amiko H265, but it doesn't appear to have the file "where I last left off" and the jump to that tagging capability. Are there any receivers that do besides the MicroHD?
I'd love to find a receiver that plays these channels solid, plus regular ones, and also has the good 30 second skip, plus dvr file position tagging that the old SatAv MicroHD has.
I do extensive recording, and the MicroHD is getting a little old. I bought an Amiko H265, but it doesn't appear to have the file "where I last left off" and the jump to that tagging capability. Are there any receivers that do besides the MicroHD?
I have several receivers, different manufacturers, and if any of them have that ability, I've never found it. It would nice if you could rename the shows you record. I tried that a couple of times and it left me with recordings I couldn't delete or play. I had to hook the HDD to the computer in order to get these recordings deleted.
All I wanted to do was give them the show's name followed by 1, 2, 3, etc. and it didn't like that at all. At first, I thought it was going to force me to reformat the HDD and start over. Now, all that shows in the recording list is what channel it was recorded on and you have to watch the preview to find what you're looking for.
Be aware that the V7 had sound sync problems with certain c band channels on 97w (Buzzr for sure but I think there were others). Mine kicked after a short time so I can't confirm this is still the case. I replaced it with a V8 that does not have this issue however the V8 recently stopped controlling my Stab HH100. Also, both boxes sometimes do not lock a channel and you must switch to another and come back to the one you want to view. Not a big deal when just watching but may cause problems with tuning for recording. I record with a stand alone dvd recorder so others will have to comment on their experiences.
- Status
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
-
T
-
T
