I've got a Starchoice 530 system with a 75 cm elliptical dish mounted on my roof with no obstructions. As the dish did not come with specific installation instructions, I'm wondering if I missed something setting it up. As far as I can tell I'm pointed in the correct direction at about 162.8 deg on the compass with an elevation of 42.8 and a scew of 87.6 for my lat of 40.62 and long of 111.82. The mounting post is plumb. I've got the two coax RG6 cables hooked into the left 2 connections on the LNB when looking at the dish.
In the system status screen I've got signal power for Tuners 1 and 2 of 63 and 56 but 0 dB for ECB/No. Same with the Tune In Sat Signal Screen. I've tried moving the dish about 1/2 degree increments in both directions and also tried adjusting the elevation with no luck. Any other suggestions to get a signal so I can finish the authorization? I've looked on every Canadian forum I can find for suggestions but no luck yet. thanks for any help.
In the system status screen I've got signal power for Tuners 1 and 2 of 63 and 56 but 0 dB for ECB/No. Same with the Tune In Sat Signal Screen. I've tried moving the dish about 1/2 degree increments in both directions and also tried adjusting the elevation with no luck. Any other suggestions to get a signal so I can finish the authorization? I've looked on every Canadian forum I can find for suggestions but no luck yet. thanks for any help.