Recent content by Bash2

I was wondering if the receiver i am using not showing accurate quality because when I used Super Buddy ( a darn nice meter) Q is at 80-85 % but when I check the quality on the receiver it shows around Q 60-62 %. There is no switched involved straight from LNB to the receiver. Can anyone...

Unfortunately the person iIam installing Fta for does not want extra holes in the wall. So your saying it should be Splitter->Diplexer> Diplexer>TV is that correct order? Yes the cable company is running digital service and cable broadband.

I was wondering how do i go about using the existing line that runs into the house at cable box? Currently its fed into 3 rooms with splitter into the house how do i go about using diplexers so I can share cable company line with satellite? The splitter is setup outside at cable box. Thanks Bash

I used red egde on one side. I might have it leveled. When I try to plumb or level i use the top of pole and check that way. Maybe i am not checking or installing the intial setup properly from the start. When i used Super Sat Buddy the max is 25-40 depending the TP but i know i can get...

Well, When i first installed it was plumb but that could change maybe when i put the dish on the pole. So that can cause it interesting thanks. Winegard 30"

I have setup galaxy 19 i took data from dishpointer and the elevation i was given was 38.6 for my location but i found the sat at 45 degree elevation is there something wrong here?? The house sits on a little hill would that make difference. I thought those numbers given are close to what you...

Stupid question :D can you control 2 tvs with one remote or you need 2 remote?

hmmm my receiver with this engine will make my satellite complete :) ViVA Sadoun :) ! Bash

Thx Lak7 That helped a lot u da man :)

I bought Sat Super Buddy online when I received today it only has DTV as option cant seem to find Galaxy 19 or other that i am interested setting up. Any help would be appreciated. Thanks Bash

Thank you all for the helpful informations. I did get it to work as you guys suggested. Funny thing is that all cilrcualr sat comes with 10750 and not 11250 kinda of weird. I used disqec 1.0 instead of chieta 2.0 not sure if that had anything do with it. I had bypass switch and directly to...

I can get circular sat but cant seem to get linear but when i hook the LNB without the switch or just hook linear Sat from LNB to the switch it works fine. The receiver I got is Viewsat ultra. "Replace the switch with a barrel connector. Try a Circular Sat, then a Linear." Lak7 I am confused...

Thanks for the responds, I hooked another switch same problems try different inputs seem one or other works. Somehow in receiver menu the signal all jumpy and doesn't seem to lock on the satellite but without switch its locks weird. my Setup is reciever -s2100-switch 1.0-LNBF. Chieta was the...

I have a question I cant seem to get my 4x1 diseqc switch to work with 2 inputs coming from my LNBF. The diseqc will work with just one coaxial run from the lNBF but as soon i hook up 2 coaxial lines into the switch the quailty bar gets jumpy and won't show which satillte i am lock. My LNBF...

Ok call me cheap but i been using kitchen utensils :) definitely can use this Tool Kit Good luck to everyone and thank You Sadoun