Recent content by colbogic

  1. C

    Slimline DIY alignment problem

    Thanks Kanon, that is a good video, I'll definitely use it to fine tune when the converters come in. Thanks again.
  2. C

    Slimline DIY alignment problem

    Alright guys I think I figured it out....thank you for all the help. I will post another update when I have it truly fixed. I actually think my dish is aligned properly, I saw in the corner of the satellite signal screen "B-Band Converter required" I guess I hadn't thought much of it and...
  3. C

    Slimline DIY alignment problem

    yrag, if you could let me know how the service guy fixed it, that would be awesome.
  4. C

    Slimline DIY alignment problem

    Thanks for the response. Alright, so I have around a 97% reading on 101 which is as good as I could get. So I should then change to 99c and adjust elevation/azimuth and try to get a signal? Like I said, I can't even get a reading on the 99c at all, simply zero. Do I need a meter...
  5. C

    Slimline alignment possible w/o meter?

    I've been trying to align my slimline (AU9-S) for a few days now and could easily line up the non-hd satellites (101, 110, 119). However, aligning the 99 and 103 have been basically un-doable thus far. I am wondering if this can be done without a meter or is it next to impossible? I have...
  6. C

    Slimline DIY alignment problem

    Well I checked the tilt first, and I am peaked at 119 at 100%. I dithered 101 to peak at 97%, I am in the high 90s on 103ca. I just can't get anything to come up on 99c or 103cb.....always all zeros. i tried doing the tilt slowly, watching the 99c and 103cb, but nothing. I also tried...
  7. C

    Slimline DIY alignment problem

    Thanks for the response, I'll check that this afternoon and let you know if that worked.
  8. C

    Slimline DIY alignment problem

    I currently have a regular 18" dish that works fine. I added a new slimline 5 lnb (4 output AU9) dish to my roof next to the old dish. There is sufficient distance between the two dishes and no obstructions. I dragged a TV up to the shed roof and worked using the receivers (HD21) signal...
See more
Top
Back