Recent content by dewaynej8

It is the one with only one port on it 110/119 has two ports if that helps.

No matter if it is wrong or right we are getting told the same thing in this area no ground rods we have to ground to the homes electrical ground preferrably at the meter base.

We are required to install a ground block between the dish and dp-34 running a ground wire from the dish to the block most of the time using the messenger wire, I use dual rg-6 with messenger and a single rg-6 and the another ground wire from the ground block to the homes ground at the meter...

No problem I use 1-888-233-3474 if they ask a stupid question or act like they do not understand I hang up and call right back and get hooked up with a new csr or as they call themselves now tsr.

I installed one today did not see any thing different than the 522 but did not have time to play with it. I picked up 3 at about 11:30 today about to get the book out of one and do some reading looks like a 522 just says 625. Wish I had more time to play with the one I put in but had another...

If you are using dish pro plus rxr and (dish pro plus lnb or a dpp-44) you should be able to put the separator like the one supplied with DHA ready dual tuner rxr's now and combine the two sat wires coming out of the rxr into one and then use the diplexers to bandstack all three signals on one...

What othe rxr's have the dish-com technology for allowing hook up of just the one rxr to a phone line like mentioned in the 942's specs. Sure would be nice to have rxr's communicating between each other through the homes wiring. We use the superdish 105 for the local stations here can only get...