Recent content by el guy

its not like every installer that goes out to a house for a "add additional rcvr" w.o, will just sit there and listen to your complaints and then rewire 7 rcvrs because you dont like where they are at now. phone lines or not. you would need to have dish set up an existing customer install...

make sure your installer didnt use the rg 59 jumpers that came in the box to feed your sat inputs.

yes

unless you have a 2x6 for a gable or eave fascia or if you have a tile roof , then yes you need a pole mount. if you dont want to have a 3meter dish on your lawn then you should rethink the super dish. get a dish 500 and a must carry dish.

bad lnb. if you changed the 110 and 119 on the sw34 and still cant get 119 then you have a bad lnb.

you need to use port 1 and port 2 from the 119 side of the lnb to connect to your dp sw34. this will give you the ability to use up to 6 tuners. you can add up to 2 more dp sw34s for a total of 14 tuners! just make sure any dual tuners you use come from the same source (eg. dp quad ports or...

it wasnt really necessary to run the 2nd line to your 522 to get your software upload. you could of used the dpp 44 and a dc passing splitter to feed both ports and the download would of came, then replace the splitter with a seperator assuming you had the dpp44 hooked up and run a check...