Recent content by Galaxy19

Thanks for your help. I'm reasonably sure now that it was the wind that knocked my dish off a bit. But for the life of me, I can't find the signal again using the Traxis. I went back to my GeoSat Pro Receiver, which allows me to move the dish one step at a time (which I think is 0.3 degress). I...

Hi, Recently my satellite system has malfunctioned. When I point to one of my preset satellite locations, I get a picture but for only 1 second then the screen goes blank with the "No Signal!" message. When I point to a new satellite, same thing. I checked all my cables, connections and verified...

Thank you for your help!!

Thanks again.

Well, I turned on my TV set to look at the firmware version I have (1086a-3500) and ... I have a signal and the Galaxy 19 channels are working. There is something very intermittent though about my setup because I didn't change anything. Today is quite hot. I am wondering, do you think there...

Thanks for your response. I think my connections are ok because the satellite dish moves by responding to movement commands. Is it possible to move but not transmit a signal well?

Thanks for your response. I have both USALS and DiSEqC on the Traxis and I use one to GO TO Reference under a DiSEqC menu (to orient to my true South) and a USALS menu to go back to 97W position. This is what I meant by it acting like my old receiver.

Thanks for your help. I have the DG-380.

Thanks for this idea too. I checked and the "LNB Power" is set to "On". However, I did notice that my DiSEqC Switch is set to 4/4 yet I only have one LNB, one dish and one receiver. Could that be the problem?

Thanks for your response. I think the Traxis is acting like the DSR200. There is much for me to learn here. I am using USALS procedure. I am orienting the satellite dish to my True South then am getting the satelllite to GO To the 97W position. To get the sat dish to Go To though, I have...

Hi, I had a DSR200C receiver from Glorystar which I used with a DiSEqC H-H Mount. It worked fine and I used it mainly for Galaxy 19 channels. The DSR200C receiver stopped working last week so I bought a new TRAXIS DBS-3500. I programed in my local co-ordinates (I live in NYC) through USALS for...