Recent content by hutchro

  1. H

    SW44 with 4 HF Splitters

    Thanks Iceberg I figured this was the case, but thought I'd ask. Thanks for clarifying. One additional question. If I were to switch to Dish Pro Plus in this setup, would I purchase, a Dish Pro Plus Twin LNB? http://www.dishstore.net/images/MVC-032S.JPG In the picture, this unit only...
  2. H

    SW44 with 4 HF Splitters

    Thanks - But its a little different I appreciate the help, but my issue is that I have only two cables running to my living room from my attic room and I need to feed 3 tuners. (2 on a 9200 + 1 other receiver). I'm trying to find a solution that will allow me to put some type of switch at...
  3. H

    SW44 with 4 HF Splitters

    Hi All, I currently have a functioning SW44 working with 3 Receivers. I have added a 9200 to the setup, meaning that I need 5 outputs instead of the 4 that the SW44 provides. My home is sprawling and made of concrete so I have to work with the prewiring that is in it. I have all inputs (4)...
  4. H

    Stumped: Dishpro + 6100 (811) tech question

    Thanks All I resolved the issue last night. It was really the Bell software more than anything else. The programmers seem to have put a error check in, for just out of the box receievers that won't allow you to pass the signal strength screen without having a number of other paratmeters...
  5. H

    REVIEW: DPP44 Switch & DPP-Twin LNB for BEV

    Nothing wrong with connecters, was working fine for a Dishnetwork install 10 minutes earlier. Nothing wrong with alignment on 91 and probably not 82 either, because if I do check switch, it all of a sudden picks up 82 instead of 91, just not both. You said you had it working with the DishPro...
  6. H

    Stumped: Dishpro + 6100 (811) tech question

    As I mentioned in my post, I am getting good signal from 91 and if I do a check switch it all of a sudden switches to 82. Now that I've left it for a few hours, it has defaulted to showing the Back Input Video channel, but when I press guide it still does not go get the guide (tries but fails)...
  7. H

    REVIEW: DPP44 Switch & DPP-Twin LNB for BEV

    Similar problem Altaman, I am having a similar problem with my 6100 using Dishpro LNB's, but I can't get out of the menu's. This 6100 has never been fired up before, so it won't let me past the setup screen no matter what I do. Any thoughts?
  8. H

    Stumped: Dishpro + 6100 (811) tech question

    I've moved from the US to Canada and I cancelled my subscription for Dish Network and bought a 6100 to replace my 811 (same thing only enabled for expressvu) So I have a Dishpro LNB (not the quad) and a dishpro compatible receiver (the 6100) and am using one of the inputs from the Dishpro LNB...
  9. H

    Having trouble getting 82!!!

    Similar problem: Dishpro + 6100 (811) I've moved from the US to Canada and I cancelled my subscription for Dish Network and bought a 6100 to replace my 811 (same thing only enabled for expressvu) So I have a Dishpro LNB (not the quad) and a dishpro compatible receiver (the 6100) and am using...
See more
Top
Back