Recent content by Kevin K

  1. K

    SES-11 and SES-1 dual lock

    Thanks, that does help and sounds like a possible issue. It's just odd that we're seeing this on 3 different dishes. The signal on both is relatively the same on both feeds when looking at our meter....signal is around -33dBm and the C/N is around 13.8. It varies slightly depending on...
  2. K

    SES-11 and SES-1 dual lock

    I don't believe it is. We've tried to switch splitters and we are seeing it right off the LNB. We're using an 8-way splitter now. P/N LS082150A1FVA000. We had it in a 4 x 4 splitter at first. The frequencies we're getting on 105W are 1350 and 1230MHz (L-band).
  3. K

    SES-11 and SES-1 dual lock

    We're not familiar with that condition. We usually dial in the center as best we can and do the side feeds from there.
  4. K

    SES-11 and SES-1 dual lock

    He replied below. Yes, it's 101W and 103W. We're not familiar with sidelobe, but will look into it. We are seeing the problem right off the LNB.
  5. K

    SES-11 and SES-1 dual lock

    Magic Static .....are you saying 8 feet? Our dishes are 4.6 and 5 meter, which would be larger than 8'
  6. K

    SES-11 and SES-1 dual lock

    Our SES-11 is on a new 5m dish, left side of a tripple feed. SES-1 is on the center feed of a 4.6m dish. Both feeds run through a separate powered Quintch splitter, with no switches.
  7. K

    SES-11 and SES-1 dual lock

    Our SES-11 is on a new 5m dish, left side of a tripple feed. SES-1 is on the center feed of a 4.6 m dish. Both feeds run through a separate powered Quintech splitter, with no switches.
  8. K

    SES-11 and SES-1 dual lock

    We have SES-11 and SES-1 on two separate dishes. During some troubleshooting with our SES-11 feed we discovered we can lock on to SES-1 on our SES-11 feed and vice versa. We're working specifically with the Vertical feed. Any idea why this is happening and if it may be causing our...
See more
Top
Back