Recent content by lavu88

  1. L

    First Look: TV2 IR Converter Kit

    Just want to share some good news... I finally got the converter box to work with my slingbox. Yeeeehawww!!! With everything failed in attempt to make the converter box to work with my VIP722, I was able to try the converter with my brother's, whose receiver is VIP222. First attempt without...
  2. L

    First Look: TV2 IR Converter Kit

    So I did make sure the switch on the back of the converter is set to TV2, Band A (which in line with the remote address 1), and checked the dip switch inside the battery compartment is set to A, then flipped the blue key over to black side and hit the record button (as suggested).... And hit the...
  3. L

    First Look: TV2 IR Converter Kit

    Hmm... a bit confuse here... the "blue" side of the key says "2 UHF Pro", so I thought it would transmit both UHF and IR, the "black" side says "UHF", therefore I thought it would set the remote to UHF mode only. Anyhow, I did flip the key over to the black side, and point the remote to the...
  4. L

    First Look: TV2 IR Converter Kit

    Took TheKrell's suggestion and tested out the converter box without the Slingbox in the loop, found out the following: - Using the remote 6.3 (without flipping the blue key at the bottom of the remote), I was able to control TV2 by pointing at the IR receiver; that proved that the converter box...
  5. L

    First Look: TV2 IR Converter Kit

    Thanks for the suggestion, will do. BTW, my TV2 remote is 6.3 IR/UHF PRO, do I need to specifically set it to IR mode? Or the remote automatically transmits both IR and UHF at the same time?
  6. L

    First Look: TV2 IR Converter Kit

    Couldn't get the TV2 IR Converter to work on my VIP722, any hints/help will be greatly apprecited. I've checked my remotes' addresses, and they are: TV1 is 8, TV2 is 1(A). I did make sure the swtiches on the converter are set to TV2 and A. A few questions: 1. I used the splitter that came...
See more
Top
Back