Recent content by lcantu

  1. L

    yet another dish alignment help thread

    I used the nut holding the dish in place for the coarse elevation setting and from there I used the fine tune elevation nut. I was not expecting to get so good levels but this is what I have
  2. L

    yet another dish alignment help thread

    just came in from aligning the dish again. Indeed i was doing it wrong. I moved it to the left and found sat 110 with only three transponders then farther to the left and increasing the elevation was able to get 101 with most of the TP in the 99-100 range. Thanks for the heads up about me...
  3. L

    yet another dish alignment help thread

    Thanks a lot for the answer! I do have a PI, my setup is IRD-->PI-->SWM lnb I tought that i aligned this to 101 but what you say make a lot of sense, i should be on 119. Will try to point the dish to the left to find 101 then thks!
  4. L

    yet another dish alignment help thread

    Guys, I know that there are many alignmet help threads around but couldnt find one with a similar issue as mine. I have been a long time dish user and i will be switching to directv soon. Im trying to get my dish aligned but after spending one day i couldnt My setup Receiver: R16-300. I...
See more
Top
Back