Recent content by netdvn

  • HAPPY NEW YEAR! EXCITING CHANGES COMING IN 2026!
    Thank you for a great 2025 and we are so looking forward to 2026!
    PLEASE CLICK HERE to find out about some of our plans for 2026 including our BRAND NEW NAME we will be moving to in 2026! Exciting times are ahead!
    Happy New Year from your friends here at SatelliteGuys.US!
  1. N

    LNB Types

    Thanks, Thanks Lak7,
  2. N

    LNB Types

    Is there way to identify the LNB type (linear/circular) by just looking at the information from Lyngsat? What type of lnb is for 103W? Thanks,
  3. N

    97W

    Thanks Thanks Chapelrun. I like your approaches. I have a 7" portable DVD player with A/V input jack and it's great for this type of application.
  4. N

    97W

    Why you can't get signal from 101W, if you use the DTV lnb (linear) on a 36" dish as Chapelrun mentioned? We can't do anything with those scrambled signal but we can see the signal and quality level.
  5. N

    97W

    Thanks Keith. My magnetic azimuth is 220.7 and I already tried it.
  6. N

    97W

    Iceberg, my elevation is 40.6, true azimuth is 210 & lnb skew is 22.9.
  7. N

    Diplex

    Thanks Lak7.
  8. N

    Diplex

    Thanks Anole,
  9. N

    Diplex

    I just interpreted from your picture and marked some notations :). L stands for low, H is for high and S stands for sharing between H & L. I have not seen a diplexer but they should have some kind of labeling to tell user which one is high and which one is low.
  10. N

    97W

    No. I just have a basic setup, no diplexers and no switches between LNB and receiver.
  11. N

    97W

    I know the cable is good, but I will try on a diff one. If the cable is bad, the signal should be very unstable. In my case it shows solid 40 percent.
  12. N

    Diplex

    Thanks Lak7. I thought the same way but just want to make sure diplexer can support signal flows either direction. So the bottom line is the L goes to L and H goes to H. Do you have any recommendation on the diplex brand and estimate cost? Sat LNB (H)...
  13. N

    97W

    Thanks Voomvoom, I have no switch (just directly connect from LNB to receiver using quad-shieled RG6). I believe Mercury II does not have an option to turn the port off. I spent 4 hrs to twist and turn the dish yesterday but whatever I did the signal was only 40 and quality was zero.
  14. N

    97W

    I got a standard Ku LNBF DG780 from Digiwave (RF=11.70-12.20Ghz; IF=950-1450Mhz; LO=10.750Ghz). Following is my receiver setup: Sat= Glaxy25 Ku 97W LNB Type= LNB 10750 Positioner= Off Transponder= 11966/H/22000 0/22khz=Off Switch= None Input= None Port=1
  15. N

    Diplex

    Would some one please explain how to use/configue diplexer to share the same RG6 cable for satellite and cable TV signal? Thanks,
See more
Top
Back