Recent content by nolipa

@wallyhts: Thanks for your answer. My mqam is in standalone mode and for more options to programm and configure i m using serial(crafts-)port connection and "putty" . About "DVB128" ,mode it is selectable,but changing to it,is not supported. Anyway,it is not so important anymore,i got another...

Hi,sorry for digging out this thread,but i don t want open up a new one. I got a D9477 for less and now i want do some tests with it. As i have seen in the datasheet ,it should work in nearly all annex A,B,C areas. I m located in europe and so i need to use annex A for standard cable-TVs or...

I have to tell: Don t trust Azbox or the company who bought them.It is only the trademark. Before Azbox were sold ,contacts between reseller were broken and they were not interested todo support anymore. In europe only Azbox MiniMe or mediaplayer is still to have,all other boxes are sold out...

You have choosen for that cases wrong chip vendor. Other vendors give ready dokumentation to their customers ,so you don t need to make much experiences. Bye the way.... hobbyists have integrate MIS reception under E2. But you need Spark ST7111 Linux Box,because of the demod. Russian...

I don t understand,why experimenting with "new" chipsets,which are worser in many functions, than "older" solutions? Build a box with STm frontend....tuner 6110 + enhanced Demod 900 and you got all you need blindscan hw,apsk,acm,vcm,multi and generic stream. Use a Sigma Dsp,which handle nearly...

About Mpeg 4:2:2,see here : http://www.satelliteguys.us/threads/286960-4-2-2-on-the-MicroHD-in-the-future?p=2896633#post2896633

Got all that italians signals on 5 west with my pc-card,but all use PLS code or are crypted in mediaguard now. One transponder delievers DMB via DVB. ....and 12,5W signal is "only" CCM MIS transponder without pls,transponder delievers 4 streams,with good (hd)programmes ,all fta. Bad ,that...

Yes,i know,i use TSReader,but as i said before these programmes can t lock those "special" transponders , without the possibilty to edit/control pls code!

The question is ...How to do? Can only record a seperated single Ts of a transponder.Have to find out how crazyscan can record the whole one. Other application which are able todo ,can t handle pls codes.

For ACM/VCM mode ,i know, Brian wrote a future firmware will be able todo it. Any news? ...and in case of Pls code ,this parameter you cannot find with a blindscan,so you have to know and edit it by your own. Only some DVB-cards with Crazyscan software and/or broadcasting/measuring...

Most of the italian MIS transponders are "hidden" for standard receivers/software. They are using ACM/VCM and/or PLS-Code. But it would be nice to know,what MicroHd is doing here!

ASI out would be a nice option. Is there any way ,like pin headers,to catch the TTL SPI signals for an extra daughter board? For more infos of that board,please google: ASI-Out-v41 Datasheet-v1-0_en.pdf

Teletext grapfic is very oldschool,but this didn t stop the popularity here in europe. Brian,how do you get the Ts stream into the microHd,do you use a DVB-Modulator or the PCB parallel input?

Yes,but it s not needed. In this case you should not choose ,the "full-implementation" way. Pc-cards like TBS 6925 or Omicom,can receive ACM signals without negotiating.

Be surprised!;) http://www.satelliteguys.us/free-air-fta-discussion/270649-new-geosatpro-microhd-receiver-100.html#post2830097 So,for those signals,users have to wait for an enhanced firmware,which Brian announce for a later date.