Recent content by Shikar

Have older one installed no issues.Curious why on the older dish the 95W LNB is angled at 45degree. Ordered another Dish for tailgating. Newer dish requires skew angle set. Doing self install and newer dish is unable to see Sat95. Set skew angle to 111degree, elevation to 40deg and Azimuth to...

Anyone install the new replacement to the DIRECTV 87cm 95W/101W Dish Antenna with the Andrew Corp Model#610-0341-01 DTV66E DTE36" ODU (101&95 degree) .

Succesfully completed setup. Replaced all RG6 cables and ends. Now receiving Sat 95 & 101 off the 36" Dish. Have two D10 receivers and 2 Phillips DSX4320 receivers. Thank you to all and much appreciated to all trying to help troubleshoot D10 & Sat95. Bye

Removed triple LNB dish. Only using 87cm Dish with LNB for 101 & 95. Auto Detect done. Phillips found both 101 & 95 with strong signal. D10 finds both 101 & 95 but will not get any signal from 95 even though it gets 90% signal for 101. D10 finds 95 sat but will not find any signal even though...

May have found the issue. The Sat95 has Eagle Aspen P1705KU- LNBF.Its a FSS /Linear Single output LNB. What type of multi switch would be needed between the KU-BAND LNB and the 6X8 Zinwell switch alllowing for multiple receivers. How to make the Single Output to multiple and feed into 6X8 switch.

D10 is finding the 95 sat but unable to get any signal strength, even though the Philllips DSX5500 has the sat95 programs runnning at 80% signal strength. Have plugged D10 were DSX5500 no luck, tried D10 alone no luck.It finds the sat95 but the strength signal is zero, even though D10 has 95%...

The 36" Dish came with 2 LNb's. One for 95 other for 101. Have tried with only D10 receiver no luck with 95. Yes have done the Auto Setuo with dash dash dash option no luck.Very very perplexed myself. Somehow getting feeling that maybe issue with 6X8 switch but than why would it allow multiple...

Removed triple LNB dish. Have only 87cm Dish. Ran auto config. Still DSX5500 Philips receiver receives sat101 at 98% and sat95 at 80% strength. But still D10 receiver will not get any signal from sat95 but gets 95% from sat101. Do I need a splitter for sat95 besides 6x8 Zinwell switch.Tried...

Only multiswitch is the one that came with the triple LNB dish(builtin). Correct, Sat 95 is using Flexport 1 since Flexport 2 is for Sat 72.5. Used no splitters. Triple LNB into Zinewell 6x8 switch & 95 into Flexport 1. Why cannot use multiple receivers to receive Sat 95 signal? Only allowing...

Software checked out to be OK. Took D10 to friends house with same setup worked without any issue. Tried auto-config with all STB at 100 & 200 no luck.Changing ports on 6x8 switch.No luck. Can get only one Phillips DSX5500 receiver to pick up all channels on 95.

Yes I did the self install. The Philips DSX5500 Receiver has signal strength of 80% on 95 and all Indian Channels plus Live Cricket works great. Only on the new DirectTV receiver D10 cannot get 95. Only option i can try is disconnect Philips receiver reconfigure. But why would two different...

Have two DirectTV Dishes installed with a 6X8 zinwell switch. One dish has triple LNB for 101,110,119 Connected to Zinwell switch. Second Dish 87cm for Sat 95 International Channels connected to flex port. Had one receivers Philips DSX 5500 working OK on all Sat 101,110 & 95 with signal...