Recent content by StoneTower

Wow thanks! I learn something every day :) It looks better on my 61" TV though... & I don't have a 61" computer monitor (yet :D).

If you really want to use your computer as a receiver, the Skystar2 will do it for you. You can use dvbdream and you will be good to go. I have an old DN dish pointing at 119W for the Nasa channel and a 36 inch dish with a motor that mostly points at 97W but I move it around some. The...

Ok I made some changes and I got it working but I still have some questions... Diseqc v1.0 or 2.0 1: Port 1 Echo7 lnb type: NA Banstacked Dishpro Ku-Hi DBS Lof1 11250000 Lofsw (Does not exist with above setting Lof2 14350000 Raw Diseqc (Blank) 22khz (off) Uncommited Port switch 0 2: Port...

Hi Anole, Ok I got my Ecoda 22khz switches. Now I have one cable coming for the HH motor dish and one coming from the DP dish. Can you help me with the settings in DVB dream. I have the DP on LNB-b (0khz) side and the motorized dish on the LNBA (22khz) side. In Dvbdream I chose: Diseqc...

That is what I was talking about. The Skystar 2 powers the Dishpro fine without a receiver for power. I am just worried about 2 switches, a motor and when switched the power hog of a Dishpro killing my PCI card. If when running the Dishpro I was isolated from the motor it might help not burn...

Thank you for the graphic. It is always nice to see what people are describing. Dvbs PCI Cards are sometimes short on power. I know the card will power the DishPro lnb and I know the card will power the motor and the single lnb I have on it now. Currently I have 2 cables running in the...

Yes the Dishpro is the twin head (2 Lnb in one case) with 2 connectors. It can be used with 2 receivers and has some type of switch built in. The Ecoda 22khz switch you talk about....does that switch using 22khz rather than diseqc commands? Are there some good quality switches that I can use...

Hi, I have a motorized dish and I just got a Invacom QPH-031. I understand that I need a diseqc 2x1 to use both the circular and linear part of the lnb on the same cable. I understand that the diseqc switch should go after the botor between the motor and the LNB. I was wondering if one could...