Recent content by Summit high

  1. Summit high

    simply baffled

    Where you would run feed into the swm8 cause doesn't have to have 13v on 101 and 18v on 101 plus a signal from 99 and 103?
  2. Summit high

    simply baffled

    I could use my 18" dish and lnb with a swm8 or 16 ?
  3. Summit high

    simply baffled

    My H24 is a full time receiver in my travel trailer. We camp in it enough to just leave it there...the wifey and I will stay right in the driveway sometimes in the winter....have a little alone time?.
  4. Summit high

    simply baffled

    Thanks for all the help
  5. Summit high

    simply baffled

    Really?.well I am learning. .what not to do. ..the hard way now that I Have all new stuff
  6. Summit high

    simply baffled

    I have always used this receiver on my 18" dish until the night I tripped on the cord and ruined my lnb...then that night I tried to hook to my son's dish on his house just after the multiswitch outside not knowing that I had to hook up after a power Inserter ...that I'm sure was in his house...
  7. Summit high

    simply baffled

    I have already hooked a old D10 reciever to the 18" dish....got signal right off and came up with" activation up" message so I know the cables ,dish, lnb ,and pointing are all ok on the 18 dish. I'm very confident any other authorized receiver will work fine
  8. Summit high

    simply baffled

    Ya the box that is normally in the front room... ( the connection to the slimline I tried ) shows in the 90,s on the odd and even transponders.. where as the suspect box is only getting odd.....even shows 0
  9. Summit high

    simply baffled

    Ok. The slimline dish and it's four reciever hooked to it are working fine. The problem I am having is with the h 24 reciever and the 18" dish on a tripod. ... and my H 24 -200 in my bedroom has 100% on the 26th transponder on the slimline...that's incidental though....I'm trying to figure out...
  10. Summit high

    simply baffled

    Oh ya I also think it might be useful info....when I had my h24 hooked to the house ( slimline ) I noticed it only had signal on the odd ones and no signal at all on transponder 26? ..I think it is probably a problem with the reciever? What you guys think? Oh ya one more bit of info....I...
  11. Summit high

    simply baffled

    Ok so....I get a whole new set up.... signal meter...cables...dish...stand...and my h24 reciever says that I have no signal.....I hook up one of my old D10 receivers and it picks up the signal right off the bat... downloads the guide info and goes straight to what it was on last time it was on...
  12. Summit high

    simply baffled

    I thought that may be the problem...the arm is not loose . Thank you for the response! Looks like a new dish is in future. Thanks again!
  13. Summit high

    simply baffled

    I am using a 18"DISH and a dual lnb on a tripod for my travel trailer when we go camping and what not. ..so it's new years day at have my tt at my son's house celebrating...and I trip on the cable going to the dish and knock it over...up until that point I had signal and was watching TV...
See more
Top
Back