Recent content by vazhog

Or what happens when you find out Sheep are just to be sheared.

Depending on the Location of the Dish on the roof. If the D*Tv Installer has to leave the Ladder --They are no longer allowed to do that --so you may have to do it yourself.

Welcome to the New Server --Same as the old server :)

Check your Swim Splitter connections are tight as well as the rg6 connections on each receiver.

All Channels or Just One?

Great News -Still waiting to test new software on my Two HR22-100 :)

No and I don't expect either

As long as it activated on the same account that it was deactivated -you will be fine

Suggest you call these folks for the best information your looking for https://www.solidsignal.com/

What you can do is get Non-SWM 3 -LNB and site you SAT Ant With that --then remove the Non-SWM 3 LNB and install the 3D2LNB and you will be fine.

And See if you see a Surprise for you :)

Well, those (myself) Included with a hr54 --are free to add an external wireless bridge. to any genie --the only reason would be if you wanted or needed a wireless 4k mini --Should anyone have a location they could not get a wire to. That's why the invitation was extended to current HS-17...

it was invitation only for HS-17 accounts. as the "box" is a Wireless 4k mini and the Hs-17 has a built-in wireless bridge. allowing the "box' to be a mini and app combo meaning it will access the hs-17 playlist as well as setup recordings.

Are you going to be adding 4K Service? Currently there is NO wireless 4K MINI so you will need a RG6 Coax cable installed at that location + the TV would also need to be 4k. (WIRED 4K MINI is a C61K-700) If you do not have 4k Service -you can get a wireless MINI from D*tv and add it to the new...

It goes up $10 every year