Search results

  1. N

    Problem with access

    Thank you.
  2. N

    Problem with access

    When accessing the pub backroom, I am asked for my password, but for some reason my password does not work anymore. I have rebuilt my computer and lost a lot of information due to loosing a hard drive. Could you check and see why I am not allowed, I did pay my yearly dues.
  3. N

    AZBox Vs CW-400HD, Help me flip the Coin.

    I have a Captive Works 4000HD and yes it does not pickup the DVB-S2 but, it can. Captive works already has two DVB-S2 tuners that will work in their unit. They are: Technotrend S2-1600 and Geniatech Digistar-2HD, they can be installed and the software is already in the unit. What is nice about...
  4. N

    Quick question about my True South

    My modified dish mount Here are the pics I promised.
  5. N

    Quick question about my True South

    I am using a CW700S and a Channel Master 90M dish with a linear low noise lnbf. I have so far locked onto 83° and 87°W but, I can't find 85° W? Is it not on today?
  6. N

    Quick question about my True South

    Test channel om 85° W? Can someone tell me if they can get the test channel on AMC 16 @ 85° W? I have been trying to get a lock on this satellite for my true South. The freq. is 12184 H 3978 3/4 PID 1623. I hope to get my dish locked down before a storm hits here.
  7. N

    Quick question about my True South

    The channel on 12182 to test on, is that H or Vert. on AMC 16@ 85° W?
  8. N

    Quick question about my True South

    turbosat, I am in Somerset, KY. I think Cave City is two hours away from me.
  9. N

    Quick question about my True South

    OSU1991, I try and do that in the next couple of days. what I did was modify a Direct Tv dish, a old one that has a lot thicker and stronger steel. I took that mount off the dish and cut the lnbf holder off. I used two thick pieces of aluminum strips to mount to the dish and the Direct Tv mount...
  10. N

    Quick question about my True South

    I'm setting up a 90M Channel Master Dish with a SG9120-B motor. I redesigned and made my own mount on the back of my dish. My location is Lat - 37.1° N Long. 84.6° W. If I figure it right, my True South should be pointing in the direction of satellite AMC 16 ku band at 85° W. Is this correct...
  11. N

    Question about wildfeeds & equipment

    I just found one of my receivers I bought new 12 yrs ago. I wonder if it would be of any use, it is like new condition. It is a Uniden President PS-650XL, I used it to pick up C and Ku bands at a fitness center I owned. I guess it still works, I have had it boxed up and in storage for 10 yrs and...
  12. N

    Question about wildfeeds & equipment

    Here is what CaptiveWorks FAQ page says. What are the types of DVBS-2 tuners supported by the CW-LMC software? There are currently two DVBS-2 tuners that have driver support with the 1.0.1.17 software release. Technotrend S2-1600 Geniatech Digistar-2HD So am I...
  13. N

    Question about wildfeeds & equipment

    Hey Mike, What about installing one of the following DVB-S@ tuners that Captive Works suggests. They say these will work with the software of the receiver. TT-budget® S2-1600 or this one TV Products Expert Will these not get the wild feeds? Thanks for the reply.
  14. N

    Question about wildfeeds & equipment

    I have a CaptiveWorks 4000HD and a CW700. I need to know if the 700 with blind scan will receive the wildfeed signals? I know I need to install a card into the 4000HD for it to work with DVBS-2. I have a 90M Channel master dish with a 0.2db universal LNBF and will have the motor for it tomorrow...
  15. N

    Big old dish on our property- someone please take it. FREE!

    looks very similar to the 11' challenger dish I bought back in 1980. The dish did very well on c band but, not sure about how it would do with ku. It was very heavy, had thick steel tubing for support in a circular pattern on the back side. I never had any problems once it was setup for c band...
  16. N

    What should I use?

    It looks like it can when you install a card in the receiver. Here is one of the two they recommend for the CW 4000HD receiver. http://www.geniatech.com/pa/digistar2.asp the other one is a Technotrend S2-1600. I am leaning more to the Digistar 2HD.
  17. N

    What should I use?

    I made my own mount today from a picture I found. Now after reading some info. on motor setup it says to set a dish elevation, I didn't make an adjustment for that so I will need to add it I guess. I downloaded a picture and saved it but, lost the URL. I will try and find it and post it on here...
  18. N

    What should I use?

    I have several lnbfs that I could try, one is a linear universal 0.2db. I went ahead and bought the QPH-31 for $45. I think it might be easier to find satellites if I have both the circular and linear on the same lnb when doing the setup. I hope to get this operational next Wednesday. I think I...
  19. N

    What should I use?

    Hello everyone, hope you had a great day. I have a Channel Master dish mold 90M-1 and I am getting ready to order a motor for it. I am wanting to get as many channels as possible on this dish, so would a INVACOM QPH-31 be the best LNBF for this setup? I also looked into the mini bud setup but...
Top