Search results

  1. K

    DIRECT TV EDMONTON

    Ok, I'll try to summarize for all, LOL Thanks for the map, first time I had seen this. Edmonton is inside the red area so therefore is in need of the 1.2m AK/HI dish. Yes, you will get all the HD with this but signal reports on 99 and 103 are in the sixties and seventies, not high 80's. Not...
  2. K

    What Dish to use to give the best possible signal?

    I have a DishTurboHD dish and a 1000.2 triple LNB. Would this work (signal wise) for Dishnetwork in the Edmonton (53 degrees N latitude) area? Which is the weakest satellite out of the 110, 119, and 129 sats? If one of these satellites is weaker, would it be best to add a second dish for...
  3. K

    Setting up Directv at Cabin in Manitoba

    No problem with the Slimline dish at this location to get all your HD channels. The HD signal starts falling apart as you move north of 52N latitude. Here in Edmonton (53.3) we get about half of the subscribed HD channels on the Slimline. Starting to see a few more 1.2 meter Alaska/Hawaii dishes...
  4. K

    DIRECTV reception in Edmonton, Alberta

    I think the tilt is important. As per dishpointer.com the reccomended tilt for Edmonton is -9.1 so 90- - 9.1 would be 99.1 (remember at 90 the dish is straight up and down) so you have to move it 9 degrees. That is what I set my slimline to.
  5. K

    Anyone use a pair of 1.2m (Alaska/Hawaii) dishes

    Thanks for the quick replies. Just to confirm, I should pick up a swm8 switch while I am here?- then 4 lines from lnb into switch and then single line into power inserter (still) or directly into the HR22? I will still be using the one receiver if that matters.
  6. K

    Anyone use a pair of 1.2m (Alaska/Hawaii) dishes

    I realize this is not needed in the lower 48. in my location I am only receiving half of my HD ka transponders with signals in the 30's. Low 90's on 101, Slimline with swm3 setup. Previosly was told to go with Ak/HI 1.2m dish but cost, size & weight to transport home from HI is not realistic...
  7. K

    Anyone use a pair of 1.2m (Alaska/Hawaii) dishes

    I can't locate "doctors" post of the retrofit of the AK/HI 99/101/103 lnb with the fta 1m dish. I am currently in HI and have secured the mentioned lnb but do not want to transport the dish, az/el mount home, just too big and heavy not to mention needless questions from border guy on my return...
  8. K

    Direct TV north of Toronto

    At 46 degrees lattitude, North Bay will be fine for Directv signal reception for both SD and HD channels. Use either the AU9 slimline dish or the older AT9 sidecar dish and you will be fine. I have done some research and found anything 51 degrees (Calgary) south is fine for these dishes. As...
  9. K

    Setting up SWM

    I was able to find a slimline dish and followed Bob's sequence for SWM startup. All is working fine now, thanks to everyone for their help. This far north, I'm getting about half the ka transponders as we are on the edge of the footprint. Signals mainly in the 30's with a bump up to the...
  10. K

    Setting up SWM

    Looks like I have a choice then either to get a slimline dish (rare around here plus the AT9 being slightly larger gives me a little more HD) or just drill a hole and run another line. Leaning now toward option 2 How do I get rid of the SWM software that downloaded to the box? Is it just an...
  11. K

    Setting up SWM

    Thanks guys, I folowed Bob's sequence and things seems okay now with the 771a now gone but a 771 present - probably moved the dish with the lnb change. I can now see the 0's on the 99,103 and 101 sat signal screen. I see there is also a SWM screen? Before I try to repoint I'll mention that...
  12. K

    Setting up SWM

    Well, I finally went ahead with the setup and I'm having a problem. Changed out lnb to the SWM3, ran the RG6 line into the Power Inserter (green light on), then into line 1 of the HR22. B Band Converters removed. Power to receiver unplugged prior. With all in place then plugged in reciever...
  13. K

    Bell in Arizona with a 1000.2 dishnet dish

    Sounds easy enough for the DVR. Is it just a second line from the dish to the bedroom for the 2nd (HD) box?. Also can an OTA attenae be added to this setup and what would the wiring look like?
  14. K

    Bell in Arizona with a 1000.2 dishnet dish

    I'm trying to help out my snowbird uncle who currently has the mentioned dish on his condo. He realizes he can't get the 82 HD sat with bell that far south but he still wants to take his 2 boxes (a dual tuner hdpvr and a single HD box) to receive the programming from sat 91. The current lnb...
  15. K

    Setting up SWM

    I received the SWM3 lnb and power inserter today via UPS. Silly question but I imagine I need to unhook power to PVR first before proceding with the other hookups? Then plug in power inserter, then box? After running setup, both meters will show signal? I would also like to confirm no need...
  16. K

    Setting up SWM

    Thanks guys for the quick reply. Looks then like I only need the SWM3 lnb and the power inserter. No Ice, no locals needed for *D as I get tons of locals with ShawD!
  17. K

    Setting up SWM

    I currently have a slimline 5 lnb setup and only one line of RG6 coming into the house. I want to use an HR22 and would like to go the SWM route instead of drilling another hole to run a second line of RG6 to feed the DVR. I am able to get my hands on a used SWM3 LNB, an 8 way wide band...
  18. K

    HR22, can the 2nd tuner be disabled?

    Old thread came up from my search. During setup I switched from dual to single as I had only one line going to the HR 22. I then added another line but could get no signal on tuner two. I switched this cable to tuner 1 and got signal indicating that both lines were live. However when I...
  19. K

    HR22, can the 2nd tuner be disabled?

    I have an HR22 and I'm trying to do the reverse and go from one tuner to two tuners but I don't see that option in the set up. Help!
  20. K

    DSR505 video blinks

    This happens with my 505 also and in particular when I switch video sources between my computer to my 505 on my monitor. If you pull down the little door on the right of the 505 and then just touch the button, it seems to reset the video to the proper setting and it stops blinking.
Top