Search results

  1. jaray

    couple 4DTV 922's to sell

    I've searched everywhere using the mobile app and for the life of me can't find the classifieds. Where are they?
  2. jaray

    couple 4DTV 922's to sell

    Is there a forum on here for selling equipment? I have a couple 922's that just got new batteries put into them which I believe work perfect that I really don't need or foresee using. The issue is, I don't sell on Ebay and am not about to start now just to sell the receivers. I also don't really...
  3. jaray

    Adding 2nd receiver

    rv1pop, that would work and I've considered that but I would prefer that my main media room receiver/amplifier can be used for other purposes at the same time (but not the FTA) I'd prefer a standalone system in my audio closet if I can..but it's definitely worth reconsidering...thanks!
  4. jaray

    Adding 2nd receiver

    ke4est or anyone else, I thought however there was no magic splitter switch to split satellite signal? Won't I still have the odd/even transponder issue with this switch or is this the answer? Otherwise, yup....simple A/B switch it is...
  5. jaray

    Adding 2nd receiver

    I'm using a c/Ku 741 lnbf (single output) for a single receiver in my house. I now want to use a 2nd receiver I have hanging around for just audio in another room. Is there a particular switch I can use to cut into my main rg6 run in my house to add my 2nd receiver? I realize I would usually...
  6. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Well, being the OP of this thread I'll say that using the Ecoda 22khz switch instead of the built-in 22khz in my DMS 741 lnbf solved the problem. The MicroHD now stores positions to the V-Box and motors fine. So, other than Brian trying to find out why, I'd say this thread can be closed and...
  7. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Weird, because the receiver shouldn't care or even know about what's at the end of the wire in terms of the dish moving. It only tells the Vbox or Gbox what to do, and assumes it does. Any feedback it gets about the dish moving would be directly from the mover. If fact, I would think the...
  8. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Well I'll be an uncles monkey, I come home from work today, power up the Micro and suddenly it takes off sending the motor somewhere. I could also now motor it east and west a bit (albeit somewhat imprecise) and then it all stopped. Nothing again...weird.
  9. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Good to know...although commands to save positions aren't even getting to the Vbox from the Micro...let alone move the motor. So its definitely a more localized issue rather than cabling to any switches/LNB's
  10. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    There is no "enable" for DiSEqC 1.2, enable isn't an option for any of those fields. You need to select something, not just "enable" Just to be very clear here, on the motor setup screen there is DiSEqC 1.0 and DiSEqC 1.1 that can be selected and ports specified, and there is another field for...
  11. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Comments inline: - read the sticky, mainly deals with sharing existing positions..not my issue - East/West controls don't move the motor at all - tried setting new positions but command doesn't get to Vbox - cant set east or west limit as receiver won't move motor - I believe I tried hitting...
  12. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Precisely my issue. Except its never moved it. Every other receiver I've had has always worked fine so there must be something up with the Micro talking to them. I certainly didn't expect this.
  13. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    sorry, I meant Motor Type: DiSEqC 1.2 is enabled, I thought you were asking about the switch type above that. So I do have 1.2 selected but no go yet, I just tried a new COAX from the receiver to the Vbox and no change.
  14. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    No, I'm not using a DiSEqC switch at all. Just talking "DiSEqC" to the V-Box
  15. jaray

    GEOSATpro Micro not talking DiSEqC to V-Box

    Just got the MHD up and running in place of my Manhattan. I have it connected to a Vbox-X which in turn goes out to my C-KU LNBF w/built in 22Khz switch. I use 22Khz on the KU side. But before all that, the Micro won't send any commands to my Vbox for some reason. I have the following in the...
  16. jaray

    Micro received, my luck..remote not working

    I need to now thank Brian and his support team for dealing with my remote issue so well. I obviously flew off the handle when I found out I couldn't even try my new receiver for a dead remote. But there's a new replacement remote shipping out of the Canadian distributor and will arrive in just a...
  17. jaray

    Micro received, my luck..remote not working

    I wish I did, I've sure got a pile of other remotes but I doubt any of them will work. Sonicviews, Viewsats, etc etc and lots of learning remotes.
  18. jaray

    Micro received, my luck..remote not working

    Batteries are all fine. However, I get no red light at all when the power button is depressed. I've removed the cover to have a look, and things look good to me. If I short a connector I do get a red light, but it appears when any of the buttons are pressed, no signal gets to the board. So I...
  19. jaray

    Micro received, my luck..remote not working

    I'm just frustrated, because suddenly I'm remembering back to getting my shiny new Manhattan which was supposed to be the best thing since sliced bread only to find it couldn't properly talk to a 22Khz switch to move my dish around. After this long, there still isn't proper support for it. So I...
  20. jaray

    Micro received, my luck..remote not working

    Well, as luck would have it, I waited forever for the MicroHD, drove to the border today to get it..connected it all up and the remote doesn't do anything. Different batteries, aimed into camera on iphone to check for IR flash...nothing. Now I'm completely frustrated. I sure hope someone who...
Top