Search results

  1. J

    Combining FTA signal with OTA signal

    I have a FTA motorized setup already and have already drilled a hole in the wall for my coax. I do not want to drill another hole in the wall and looking for a way to combine the OTA RF signal outside and split them up again inside the house. That being said, I have a motorized setup and do...
  2. J

    Putting together a BUD

    "izvinite" sergei, I see now. Thanks stogie, is the manufacturer "Perfect 10"?
  3. J

    Putting together a BUD

    I can not find this manual on their site...send me the URL please
  4. J

    Putting together a BUD

    You have the URL to this manual @ Skyvision?... I looked for it over there, can not find it.
  5. J

    Putting together a BUD

    Photos at last Sorry for the delay. I must say, since I am a BUD newbie, I am still unsure of what is called what, specially around the mounting, clamps, etc...
  6. J

    Post your BUD installation pictures please

    You are lucky, having opens space. I am limited with my yard and that is why I need to make some create plan.
  7. J

    Putting together a BUD

    Thanks for all you helping. Sorry for the delay in posting photos... will do soon. I have No indication of manufacturer, zero. If you can, please post the original manual.
  8. J

    Post your BUD installation pictures please

    I am in the process of getting ready to install my BUD. I have been looking for a good place for the install and it sure can not be on the ground where I am. so it will either be on a pole up 8 feet or so, or on the roof (which I actually do not want to do). Please if you have mounted a BUD on...
  9. J

    Putting together a BUD

    Hi all, I am slowly learning the parts of a BUD, but since I got this BUD, I have some trouble understanding how it all fits together. I have already put together the actual dish. Now there is the metal ring behind it that clamps onto the dish... as well as the part that slips onto the pole...
  10. J

    G10r will end this weekend ! (swapping to new bird)

    E/W or Up/Down? I do not want to mess up my other channels on the arc. It took me forever to get it optimized.
  11. J

    G10r will end this weekend ! (swapping to new bird)

    It is on a motor... I have adjusted it more E or W, but it is on the arc.
  12. J

    G10r will end this weekend ! (swapping to new bird)

    Ever since the change my 123 reception has been horrible. After the change I lost virtually all channels, one-by-one. Recently I deleted all my channels on 123 and re-scanned millions of times. The best I get is 5 channels, with the strongest TP being the Correctional Services Network. I do...
  13. J

    Free DCII channels?

    I know this is an old posting, but here is a usefull link: http://broadband.motorola.com/4DTV/4DTVChannelUpdates_111405.htm
  14. J

    Polarity with C-band

    great responses, thank you everyone...
  15. J

    Polarity with C-band

    Can anyone please explain to me how polarity is controlled on C-band? I know on my KU/DVB system the DICEQ switch controles it, but on c-band?
  16. J

    Installing a used c-band BUD

    nice site, thanx so much. i will see if they have a mount that will work for me. i do not have a flat roof... but a nice roof mount could help me out here.
  17. J

    Best LNB for C/Ku band

    can you please explain corotor to me?
  18. J

    Best LNB for C/Ku band

    Hi all, Lots of questions this week :-) The LNB I have right now is: Mini-Mag 140011 Input: 3.7 - 4.2 ghz Output: 950-1450 Mhz Gain: 65 db Noise: 30k Now, before I put up this dish with this LNB, I was wondering about something: If I use this LNB, will it be c-band only? Will it suffice...
  19. J

    C-Band feedhorn part: what is this called?

    Ok, so if I do not need this ring, then I am wonder about something else. The 4 poles comming from the edge of the dish, to the center where the feedhorn connects... what do they connect to by the feedhorn? Should they not connect to some ring?
Top