Search results

  1. j_met

    Rewiring and Recommendations on Wiring

    I eventually want to replace the coax splitter with an HDMI splitter and run one HDMI out of the receiver to a 1 X 4 HDMI splitter and run to each room. It is only my wife and I living here so it is ok if all the TVs are displaying the same show.
  2. j_met

    Rewiring and Recommendations on Wiring

    Not doubting your answer Broe but, if I hooked it up that way, how would it be different? Why is it working now? It is working now and it is not possible for me to put the power inserter between the dish and the splitter as I do not have an electrical outlet in that space. to give it power...
  3. j_met

    Rewiring and Recommendations on Wiring

    Chip - See updated drawing
  4. j_met

    Rewiring and Recommendations on Wiring

    I've had DirectTV for about a year at this house. I've recently had some issues with my receiver freezing up and stuttering with the audio. I actually think the hard drive is going out in it. I am going to do a hard reset and hard disk scan. Since I started to have these issues, I've done a...
  5. j_met

    Program Remote to Control the Genie C31-700 Client

    Broke down and called customer service....Code that you need to use is 987....
  6. j_met

    Program Remote to Control the Genie C31-700 Client

    How do I program a RC65X or RC66X to a mini client? I have tried holding Select & Mute until the light blinks twice, then entering 9 6 1 to clear, then entering 0 0 0 0 1 to link the remote but, it will not work.
  7. j_met

    Power inveter

    How do I figure out if it's a power passing leg? ?
  8. j_met

    Power inveter

    Shouldn't it go behind the tv instead of laying on the floor connected to a wall jack coming off the splitter? ?
  9. j_met

    Power inveter

    I the installer came out last Friday and hooked everything up. It's still working but I noticed the power inverter is still plugged in to one of the wall jacks in a totally different room than the receiver. If I unplug it, everything quits working. What is it and why does it have to be...
  10. j_met

    One cable in, 2 boxes, 4 tvs

    I was thinking about that....the 2nd tv would be located in different room though...so I would have to buy like a 25 or 50 ft component....if I didn't want to do tat, my only other option is to get another client for the 3rd tv?
  11. j_met

    One cable in, 2 boxes, 4 tvs

    I just bought a new house. The people before me had cable. They had the main cable dropped in the a/c closet connected to a reg 4 way splitter. Each cable ran to a different room and connected to the cable wall box. My current setup is the HR-34 Genie with 1 mini client. What I want to do...
  12. j_met

    How to hook up genie (HR34) with no genie clients

    I can't seem to get the hr34 programmed to receive commands from the RC65RX remote
  13. j_met

    How to hook up genie (HR34) with no genie clients

    Can anyone confirm if I can use the ir remote with the receiver in the living room and a rf in the bedroom at the same time or do both remotes need to be rf to work at the same time on the same receiver?
  14. j_met

    How to hook up genie (HR34) with no genie clients

    That's exactly what I want and how I had my Dish Network hooked up...I just didn't know if there was another method with direcTV...current remotes ends in X so I need to buy 1 RF....thanks
  15. j_met

    How to hook up genie (HR34) with no genie clients

    I just got DirecTV Ive got the HR34 on the living room with a mini client in bedroom. I am getting tired of having to reset the HR34 everytime the mini client locks up on the grey screen. How do I hook both tvs to the hr34? (yes I know both tvs will display the same picture)
  16. j_met

    External Hard Drives & Genie (HR34)

    ok I can use a HDMI splitter between TV 2 & 3 to work around not having coax.... What about remotes? I have a total of 3 remotes now with 2 of them being on the same "address"...that way I can control tv 1&2 with separate remotes and 1 is a IR the other is the the kind that works through walls.
  17. j_met

    External Hard Drives & Genie (HR34)

    I have been a Dish Network customer for about 10 years. With the Dish 922K receiver, you can attach an external hard drive via USB to expand your recording capacity. Can you do the same with Direct TVs Genie? Also, what video connections are on the back of the receiver and how many? Reason I...
  18. j_met

    Survivor: Samoa

    Honestly, he is the only one actually playing the game of Survivor......It seems like everyone else is just there to make friends, with the exception of Shambo I think Russel and Shambo need to hook up...
  19. j_met

    Survivor: Samoa

    True he did use it when he wasn't the target but, history of survivor has taught us that when people have the idol and hold on to it, they usually get blindsided...
  20. j_met

    722K + OTA Module

    This is what the DISH site says I receive with my local channel subscription . I was getting 19 through the OTA antenna but, it said Digital Programming in the guide.
Top