Search results for query: *

No, because $10 of that was already applied to the 722, so it's $12/mo and for that $12, you actually get something. It;s not just some arbitrary price increase

There are OTHER benefits from the Hopper at TV1 and the Joeys at the other TV's. High-def on every TV. More recording capabilities without conflicts. Quadruple recording space Streaming apps at each TV Access to On-Demand program in a more sensible way with much better functionality than on the...

Actually, on TV2, if you're watching on Air CH60, Ch63 mirrors TV1 and if you're watching on Cable Ch73, Ch75 mirrors TV1 @ the TV2 location

Probably, the early info was simultaneously, but I had it not work once and just held the power button in - the plus remained unplugged - for about a minute and it rebooted back to a hopper

Again, not correct. You have a DP SIngle and DPP Dual. All the ports are outputs. You can't chain them together. Also, splitters do not work. The 722 or any dual-tuner needs a Diplexer inline and a Triplexor at the box for both TV's, 1 and 2 or a direct line to a Separator atr the box and TV 2...

The 1000.2 and the 1000.4 are 2 entirely different dishes and a WA and EA were made for each and are not interchangeable.

Leave the Joeys in standby and they should pick up the update after the Hopper/Plus updates

Better than that, hold the POWER button in, not the red reset button, for about 45 seconds or so while disconnecting the power to the Plus and moving the HDMI cable and it will reboot to the normal Hopper only

The Dish 1000 was typically used on a 1000.4 Dish and the feed arm is longer and the spacing between the "eyes" was different. The reason I asked for pics is because there is no way to put a DPP Twin or a DP Single on the bracket for the 1000.2 Feed arm. The brackets aren't exchangeable on any...

...and still be able to record something no matter what each of you are watching

Pictures would be helpful

I haven't heard. I'm curious to find out

The backing structure is going to be the same as the 1000.2 but the reflector is going to be the 500 and I don’t know if they work together. As soon as we get some, I’m going to test it.

I would wait since the new one is so versatile with all the different systems

You could have just disconnected the Wally from the Internet or went into Parental Controls and disabled purchases, FWIW. There is a new Dish setup coming out this month. DIsh 500 with the same backing structure as the 1000.2 and new DPH WA 500 Twin that will run Hoppers AND VIP's, including...

See above.

612's are and 211K's have been. Try getting one replaced. You cannot. I haven't seen a Work order to replace a 211 with another 211 in well over a year and we have had none in our shop in almost as long

But your equipment IS outdated and is actively being updated to Hoppers

Also, make sure your SSB is updated to the newest Field Guide by downloading the Flash program from the website. You'll need a USB-A to Mini USB chord

It already has

https://my.dish.com/support/complete-sig-loss

That is the fix. It happens on some Hoppers, too

I saw on Reddit that it's finally available for Apple TV users!

Yeah, let it install itself when it's time comes up to install the software.

Umm, really??? Continuing your show during a Satellite signal outage is needless??