Search results for query: *

Has anyone gotten the USB Debugging mode to successfully toggle to the on position? If so, what is the correct adb command to successfully connect, is it adb connect IP:5555? Thanks!

I can safely say I am not having that problem. You might try holding the power button down on the front of the Hopper for 45 seconds or so... HipKat probably knows exactly how long to hold it for to do a complete reboot.

Thanks! Can the holding POWER button in on the Hopper 3 be done after unplugging the Plus?

You also have a auto bill pay discount. I get 5% cashback from the credit card and also the $1.00 payment each from 10 different credit cards credits the full $1.00 to send the card back to a $0.00 balance so it's 5% on the $180 or so after the $10.00 is free money while still earning rewards.

That's how it is supposed to work, it will always update to the most current version and skip any versions it did not download before. Just like if automatic updates didn't work, I would go all the way from H357 to H376 if I decide to manually check. While these are receivers, they are still...

Well, H374 with the Hopper Plus reboots 4-8 times and does not reboot during the nightly reboot times. H373 and earlier and H375 did not have this problem. Can't say much about H376 yet. I wished it was tomorrow as I forgot what version it was, the one from February 2024 took 2 months before...

$178 is still cheaper that what I am paying without all that equipment, you have the 2 J4's and 2 WJ4's but you may be on a lower package.

Yes because the internet is not direct path from point A to point B. If you stream anywhere, it buffers first before playback even with youtube, it's not instant and it also needs to send the request and wait for the response from the streaming provider. It has nothing to do with the H3...

Ofcourse, they could offer one with the satellite and one without the satellite at a cheaper price than the satellite version. I suppose they could like Comcast have a on-demand DVR.

You are very welcome, charlesrshell! Glad the procedure is the same for all ATV's. Things were harder before P12506 as mentioned here which required putting the ATV device to sleep as mentioned here: https://www.satelliteguys.us/xen/threads/hopper-3-setup-with-joey-plus-issue.406706/post-4885657

Yes but it will take a long time as they will reply on the 30th day after being served which is their deadline to respond and you can respond to the FCC but it will just be another 30 day response notice served. And all they will try to do is get communications between you and the provider...

The update takes around 1 minute to download and another minute to install and then the Plus will reboot while the H3 will not so just do it when she isn't using it. You might want to do the Joey 4 in the meantime to see what the difference in the procedure is. Good luck!

For Cox, write by email to these but only write to one each time then give it a day or two and write again to the next one using the same email but remember to address each person differently if no response or response not satisfactory: Cox Communications executive customer service contacts: 1)...

Faster if you do it manually as it will eventually do it automatically but could be weeks later.

And in reality, it's more than that as RokuOS is based on the Linux kernel which is where the encryption needs to be added and not the user level. Remember DISH is technically a business competitor to Roku so in the best interest of Roku, they are not going to add the encryption support needed...

Problems are to be expected as: Apple TV = iOS = FreeBSD OS with a Mach kernel Hopper = Linux OS Amazon Firestick = Amazon modified Android OS which is also Linux kernel based

Diagnostics screen, Available Joey Software after the nightly 1AM Pacific Time (GMT -7) reboot now shows correctly with the following: W152 W208 J276 J476 J576 P529 P52901 P629 P62901 P129 P12902 Download ATV files shows: Joey 4 P52901 Wireless Joey 4 P62901 Hopper Plus P12902 So perhaps when...

charlesrshell - Hopper Plus software is now updated to P12902 And here are the current versions for all DISH Android TV hardware: Joey 4 P52901 Wireless Joey 4 P62901 Hopper Plus P12902 It appears that unlike the Hopper 3 software which shows the installation timestamp, the Hopper Plus P19202...

No idea since I don't have experience with Joey's so you can see if it has that function and provide instructions on the differences so it can be useful for others.

That's why personally, I think Hybrid supporting everything like gas, EV is the best solution.

I googled the number and it is connected with one of the following: Mansel Kallen from http://mansel-kallen.or.nf/, Cydona Tensmeyer from https://cydona-tensmeyer.or.nf/, Nathion Rittinger from https://nathion-rittinger.or.mw/, Deiashia Sabagh from http://deiashia-sabagh.or.nf/, Vandalyn...

Thanks dweber for posting about the new version. Just updated my Hopper 3 (H375) with Hopper Plus (P12901) to H376 and I finally saw how updating works with the Hopper Plus added to it. Instead of seeing the updating progress, there is no video at all and eventually, there is no video other...

You may want to post the model number from the sticker of the OTA adapter to see if it's one of the ones with the overheating issues or not.

Just curious, how much is your DISH bill? Mines is $190 with the protection plan with only a 1 Hopper 3 with Hopper Plus setup which consists of America's Top 250, Local Channels, Hong Kong Jade Cantonese package $29.99 and we only watch what's in the $29.99 whether live or DVR as that's what...

The reason is the satellite feed is direct from DISH. The internet feed goes through many networks before it reaches you so there will be latency added depending on how many networks it goes through and it needs to download first and not everyone will start at the exact same time so it will not...