Search results

  1. Almighty1

    Seagate Hard drive not seen by Hopper3

    Even if you don't have Linux running, you can just clone or image to a new drive using Macrium Reflect software on the PC and it will work fine. The problem most likely is not the drive itself but rather the SATA to USB bridge used which the Hopper H3 does not like but works fine with the...
  2. Almighty1

    Which External hard drives work on Wallys & Hopper 3s currently?

    Seems like the only advantage is really using one large drive instead of multiple drives like before which were limited to 2TB each so it's 6TB vs 7TB and just 1TB more but should the drive fail, there goes up to 7TB of recordings instead of just 2TB. I am sure you meant TB and not GB. As far...
  3. Almighty1

    Which External hard drives work on Wallys & Hopper 3s currently?

    That is true, DISH officially only says up to 7TB drives are supported but not how many. And I have a drive which is Western Digital 3.5" 2TB that works fine in a Thermaltake Dock on a Hopper 2000 but not on the Hopper H3 with the same dock as it will only show partial contents on the screen...
  4. Almighty1

    Which External hard drives work on Wallys & Hopper 3s currently?

    Interesting, I thought it allowed 3 drives of up to 7TB each making it 21TB as mentioned here: https://www.cepro.com/cep/product-focus-hopper-3-now-with-20-tb-dvr/ I never knew plugging in a specific order would make a difference since I noticed sometimes during the nightly reboots is the H3...
  5. Almighty1

    Which External hard drives work on Wallys & Hopper 3s currently?

    I thought Seagate did make a 7TB drive called the Ironwolf assuming one is able to get their hands on it. I had a external HDD dock that worked on the Hopper 1 but was not recognized with the Hopper 3. Now the other question is, is it true that one can do 21TB max over 3 devices as mentioned...
  6. Almighty1

    Which External hard drives work on Wallys & Hopper 3s currently?

    Can the Hopper 3 (H3) really use all the capacity of a 7TB drive since I thought 2TB was the largest it would allow usable per drive?
  7. Almighty1

    Hopper 3 low volume for satellite but good volume for YouTube App

    Interesting, I thought it was Wide that would make the volume louder as mentioned in this thread: https://www.satelliteguys.us/xen/threads/hopper-3-audio-issue-low-volume.375507/
  8. Almighty1

    Hopper 3 low volume for satellite but good volume for YouTube App

    Lucky for you, on my LG 65EF9500 65" OLED TV with the tv's audio equalizer already set to max for treble and bass, it seems that for any satellite content or even OTA via the H3, I need to turn it up to "40" and it couldn't even reach the "15" for YouTube on the H3. I think they really just...
  9. Almighty1

    Hopper 3 low volume for satellite but good volume for YouTube App

    That's interesting. The volume for the 900 series audio channels are exactly the same as the video channels for me. When Range setting was available, it seemed like some channels were louder than others but I have volume level as off but it seems to be all volume levels are the same.
  10. Almighty1

    Hopper 3 low volume for satellite but good volume for YouTube App

    There used to be a way as the Range setting is no longer there which would have fixed it if there was a wide setting. I would've thought the volume level output on HDMI was a limit that was applicable for all audio output on the H3.
  11. Almighty1

    Hopper 3 low volume for satellite but good volume for YouTube App

    Greetings everyone: I have a question, is it normal that on the Hopper 3 that the volume for satellite channels are low but significantly louder when using the YouTube App? I am running software v548 and it seems under Audio Output, I have Dolby Audio = On, Volume Leveling = Off (tried on and...
  12. Almighty1

    Hopper 3 stuck on starting up screen

    And you are correct as I had the same issue a few days ago and all I did was do #1.
  13. Almighty1

    Hopper 3 stuck on starting up screen

    I managed to fixed it by doing the following: 1) Unplugged all the External Hard Disk Drives by disconnecting the USB 3.0 hub from the Hopper 3 while leaving the OTA Single tuner connected 2) Disconnected power from the Wireless Wi-Fi router and left it unplugged as I am on Wi-Fi for the Hopper...
  14. Almighty1

    Hopper 3 stuck on starting up screen

    I just have this problem except I do not have any ethernet cables plugged in so if one is connected to WiFi, is there something similar that can be done?
  15. Almighty1

    YouTube app is gone from the hopper 3 DVR

    Youtube came back as soon as I posted earlier.
  16. Almighty1

    YouTube app is gone from the hopper 3 DVR

    I noticed today when I tried to use it on the H3 that the app is gone.
  17. Almighty1

    Hopper 3 - what button on remote does one press to skip ads in YouTube?

    Yeah, I have the Firestick 4K as well but haven't really used it yet as what I have noticed is the Firestick only does true video size and I can't even stretch it so the actual video is way smaller than the 65" glass it's on.
  18. Almighty1

    Hopper 3 - what button on remote does one press to skip ads in YouTube?

    navychop, you are correct since it's more for convenience since my LG OLED remote usually doesn't have batteries in it as I hardly use it so I need to use the mobile app to switch inputs back to the H3 after the Google Chromecast Pro automatically makes the tv change inputs which seems to have...
  19. Almighty1

    Hopper 3 - what button on remote does one press to skip ads in YouTube?

    HipKat, I noticed that too. Alphabet Inc, who owns Youtube and Google needs to make as much money as they can get.
  20. Almighty1

    Hopper 3 - what button on remote does one press to skip ads in YouTube?

    Thanks Bobby, never figured out the button since it's labeled as fast forward on the screen so obviously pressing the skip button doesn't work.
Top