Search results

  1. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Thanks. I saw that. I'll check it out again.
  2. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Any particular one recommended?
  3. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Is there any real advantage in using one of the newer PLL LNB's over an older LNB rated @ .4 dB noise ?
  4. freddylq

    OTHER Digipower SG-2100 Replacement ?

    No, tried 11916V for Montana PBS but nothing there.
  5. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I got it!!!!!!!!!!!!!!!!!!!!!!!!
  6. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Thanks, I had 3000 instead of 30000. Let's give it another try.
  7. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Anybody have a good active TP on AMC 21 ?
  8. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I was fooling around a bit with the system from inside my house. I had the receiver move over to Galaxy 15 and I did a blind scan. I picked up the Reuters live feed which is on on SES 15. Again a 4 degree difference. Now I strongly believe the whole unit must have been shifted to the east 4...
  9. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I found a GOTO Reference option and each time I pressed it the mount would go to "O". So that is working.
  10. freddylq

    OTHER Digipower SG-2100 Replacement ?

    That's a great tip.....I never would have thought about that.
  11. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I don't remember seeing a GotoReference/GotoZero command. I'll have to check into that.
  12. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Yes you are correct. West it will be.
  13. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I was thinking....since the receiver thinks it's on AMC21 but the dish is actually on Echostar 9 off by 4 degrees can't I just rotate the whole assembly until I get to AMC21 ? I would have to rotate it to the left (east) ?? Off course I would go through your checklist before attempting this.
  14. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Hi A33, using USALS and yes I checked my coordinates and they are correct. Looks like motor is off by a few degrees. Will play with it this coming up weekend.
  15. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Thank you you all for the advise. I'm going to make the adjustment this coming up weekend. I don't like running back & forth from the front upstairs of my house to the back yard so I'll take my small TV and hook up the receiver on a table next to my dish. Keeping my fingers crossed.
  16. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Ohhh and also satellite closest to top of my arc would correspond to my longitude which is 118 degrees west correct ?
  17. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Do I need to set the motor to center "0" before I follow your advise ?
  18. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I played with my X2 yesterday night after resetting the motor. I had it go to AMC 21 @ 125 degrees and did a blind scan. I viewed some of the channels on it and it turns out I'm on EchoStar 9 @ 121 degrees! Maybe the motor/dish is not properly aligned to true south after being out there...
  19. freddylq

    OTHER Digipower SG-2100 Replacement ?

    I have reset it a couple of times. I've also slewed it to its limits using the buttons on the motor to make sure it wasn't getting stuck anywhere along the arc. All well.
  20. freddylq

    OTHER Digipower SG-2100 Replacement ?

    Yes, I have reset the motor a few times following the manual instructions after moving it to the "0" center position. I've even moved it to both its limits using the button on the motor to make sure is wasn't getting stuck anywhere and all well. My system was working properly when I last used it.
Top