Search results for query: *

I just got my system back up and running. This DB was very useful in getting me back up. Thank you!!!

I did it! Once I correctly pointed to Eutelsat 117 West A I had to tweak the dish elevation (some play on the motor) til I saw a signal in Quality on 11940 V.

Thank you so much. Makes better sense now. Will give it a try when I get home. 👍

Ok. So according to dishpointer the dec angle is 5.5 so the dish elevation scale is 39. 😀

So I just use that value for elevation? I don't have to do the math?

How does one set the dish elevation angle on the GeoSatPro 90cm ? I'm using a Stab HH90. According to the Stab instructions its: Degrees of dish elevation = P - (45 - latitude) where P = degrees of dish elevation for fixed mount given by the manufacturer. Where do I get the "P" value for this...

Thanks for the great tip!

Thank you! It seems to now be pointing in the right direction (or close). No signal but I'll need to adjust it.

Quick question. I've been out of it for awhile. Am I not suppose to enter my longitude somewhere in the setting since I'm using USALS (Goto X) with my motor ?

Receiver firmware updated and database updated. Ready for the weekend. I hope everything goes well since I think my dish/motor are not aligned anymore :confused:.

Just delivered by the post office!

I actually have 2 other GTMedia units. The last one did stop working shortly after receiving it but after sending them a requested short video they replaced it promptly.

Mine will arrive on Monday. This will be very useful for my installation.

I spoke to soon. Having issues with 11760 again....I'm going to switch out the LNBF and see if that makes any difference. :mad:

I was finally able to pick up 11760 today with no rain. Though the signal quality is 69% compared to 72% on 12120.

After a couple of days of trying all of a sudden it's fine! It's not raining anymore, could that have been it ? Signal Quality 69-72%. :happydance

Rain affects Ku right ?! Cozi is coming in intermittently right now. Trans 12145 is fine

Nothing on those two other trans. I used to be able to get them...I'll do some more tweaking tonight which I had done to be able to get a good signal for Cozi on 12120.

I recently replaced my old motor with a STAB HH90. My old one was similar to the SP-120.

No luck with the other transponder...It's detected during a blind scan but I don't get any signal. No issue with 12120 though.

My blind scan did not pick that up. I'll add the transponder and try that next.

Nevermind! I fixed it...seems this motor has some slack when falling towards the east. I set the sat location as 103.5 instead of 103....signal quality went up to 72% and Cozi TV is playing fine now. I may do some more fine tuning on it.

Need some help here with Cozi TV. Used to get it fine....now it comes and goes. When I do get some signal the signal quality is up at 69%. May display briefly with pixelization but then it loses the signal. It's on 12120/H/3000 on 103W. Any ideas what's going on ? I can pick up the other...

You can delete all those sats and add the North American sats. That's what I do when messing with my receivers.

:imshocked I envy you.